Los pequenos motores para uso fuera de la carretera del 2002 y posteriores, se garantizan por dos anos. Si alguna pieza de su motor relacionada con la emision esta defectuosa, la pieza sera reparada o reemplazada por Yard Man. Responsabilidades de Garantia de los Propietarios Como propietario del pequeno motor para uso fuera de la carretera, usted es responsable de realizar el mantenimiento requerido que aparece en el manual del operador. Yard Man recomienda que conserve todos los comprobantes q

No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of Lantronix. Printed in the United States of America. Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of The Open Group. Windows is a trademark of Microsoft Corporation. Warranty For details on the Lantronix warranty replacement policy, please go to our web site at Patents Patent #4,972,470; other patents pending. Contacts Lantronix Corpor

Steel or 12 gauge Stainless Steel. Exterior: 22-gauge Polished Stainless Steel Firebox: 14” Diameter 1/4” thick H.R. pipe. 1/4” thick firebox door. Uses wood logs or charcoal. Capacity: 3-4 logs 4”-6” dia. 12-16” long. Dimensions: 76” tall, 47” wide, 87 3/8” deep (including covers) w/ 15” legs Shell Dimensions: 61” tall, 33” wide, 79 3/8” long. Food Racks: Rotisserie with four (4) hanger racks, each with three (3) 18”x 22” food racks (12 Total). Thirty Three (33) Sq.Ft. of Cooking Surface. 4 11/

(Note: minimum clearance dimensions are from the oven cabinet, not from component cover.) (If provision is made for access to service, minimum clearance can be reduced to 2" on left side.) May be installed through a combustible wall with zero clearance with BBR kit No. 2099. ANY VENTILATION SYSTEM MUST BE INSTALLED IN ACCORDANCE WITH LOCAL CODES. CONSULT WITH LOCAL OFFICIALS AND A COMMERCIAL KITCHEN VENTILATION CONTRACTOR PRIOR TO INSTALLATION. Southern Pride Distributing, L.L.C. Phone: 618-997-

2099. ANY VENTILATION SYSTEM MUST BE INSTALLED IN ACCORDANCE WITH LOCAL CODES. CONSULT WITH LOCAL OFFICIALS AND A COMMERCIAL KITCHEN VENTILATION CONTRACTOR PRIOR TO INSTALLATION. Southern Pride Distributing, L.L.C. Phone: 618-997-9348 2102 East Main Street - Marion, Illinois 62959 Fax: 618-993-5960 sales@sopride.com service@sopride.com parts@sopride.com Sales: 800-851-8180 Service: 800-437-2679 Service Fax: 618-993-0378 9/1/04 1234567 1234567 1234567 1234567 1234567 1234567 1234567 12345 12345 1

Exterior: 22-gauge Polished Stainless Steel Firebox: 10 ga. H.R. steel with 10 ga. H.R. firebox door. Uses wood logs or charcoal. Capacity: 1-2 logs, 4”dia. 12” long. Dimensions: 73” tall, 74 1/4” wide, 41 1/8”deep (including covers) and 191/4” legs Shell Dimensions: 44 5/8” tall, 74 1/4” wide, 33 3/4” long. Food Racks: One 18”x24”, four 12”x 42” food racks (5 Total). 19.25 Sq.Ft. of Cooking Surface. 12” Spacing between food racks. Air Circulation: One Convection Fan. Temperature Range: 100-325

Steel or 12 gauge Stainless Steel. Exterior: 22-gauge Polished Stainless Steel Firebox: 14” Diameter 1/4” thick H.R. pipe. 1/4” thick firebox door. Uses wood logs or charcoal. Capacity: 3-4 logs 4-6” dia. 12-16” long. Dimensions: 76” tall, 69” wide, 87 3/8” deep (including covers) w/15” legs Shell Dimensions: 61” tall, 55 1/4” wide, 79 3/8” long. Food Racks: Rotisserie with four (4) hanger racks, each with three (3) 18”x 42” food racks (12 Total). Sixty Three (63)Sq.Ft. of Cooking Surface. 4 11/

3. Repeat steps 1 and 2 until the engine will no longer start. ¦ Remove the spark plug and pour about 1/4 ounce of 2-cycle mixing oil into the cylinder through the spark plug hole. Slowly pull the recoil starter 2 or 3 times so oil will evenly coat the interior of the engine. Reinstall the spark plug. ¦ Before storing the unit, repair or replace any worn or damaged parts. ¦ Remove the air cleaner element from the carburetor and clean it thoroughly with soap and water. Let dry and reassemble the

2 - 5 x 8 mm screws, 2 - 5 mm nuts, 2 - 5 mm lock- washers, (bracket to shield). 2 - 5 mm nuts, 2 - 5 mm lockwashers (Bracket to Gear Housing) Assembly (continued) 1. If installed remove nylon line head, adapter plate, shield plate, and plastic shield: a. Align locking hole in adapter plate with notch in edge of gear housing and insert head locking tool (A). b. Remove line head (B) by turning it clockwise until head is completely off of shaft. c. Remove locking tool. d. Removethreescrewsholdings