MOUNTING OF PROTECTOR To meet the applicable safety provisions, only the tool/protector combinations as described in the table must be used. Use genuine DOLMAR cutter blades or nylon cutting head. The cutter blade must be well sharpened, free of cracks or breakage. If the cutter blade hits against a stone during operation, stop the engine and check the blade immediately. MS-260 U/261 U MS-330 U/331 U MS-230 C/231 C MS-260 C/261 C MS-330 C/331 C to Engine 20 Star Blade Eddy Blade Protector for me

Use only approved fuel storage containers. CORRECT HANDLING OF MACHINE Attachment of shoulder strap Always wear the shoulder strap and adjust the strap length so that the cutter blade is kept parallel with the ground. Detachment The shoulder strap has a quick release latch. In an emergency, pull the red strap (A) to detach the machine from you. Be extremely careful to maintain control of the machine at this time. Do not allow the machine to be deflected toward you or anyone in the work vicinity.

Use genuine DOLMAR cutter blades or nylon cutting head. The cutter blade must be well sharpened, free of cracks or breakage. If the cutter blade hits against a stone during operation, stop the engine and check the blade immediately. MS-260 U/261 U MS-330 U/331 U MS-230 C/231 C MS-260 C/261 C MS-330 C/331 C to Engine 20 Star Blade Eddy Blade Protector for metal blades Nylon cutting head Protector for cord cutter Sharpen or replace the cutter blade every three (3) hours of operation. If the nylon

Cutting Tools Use only the correct cutting tool. • Resting • Transport • Refuelling • Maintenance • Tool Replacement Caution: Kickback Diagrammatic figure Diagrammatic figure Maintenance instructions -The condition of the Brush Cutter/String Trimmer must be checked before operation, in particular of the cutting tool, the protective devices and also the shoulder strap. Special attention must be paid to the cutting blade which must be correctly sharpened. -Stop the engine and remove spark plug con

- Inspect the cutting tool at short regular intervals for damage ( Detect hairline cracks by means of tapping-noise test ). - Operate the Brush Cutter/String Trimmer only with the shoulder strap provided. It should be suitably adjusted before using the Brush Cutter/String Trimmer. Adjust the should strap according to the user’s size to prevent fatigue during operation. Never hold the Brush Cutter/String Trimmer with one hand during use. - During operation always hold the Brush Cutter/String Trim

Sleeltoed safety boots are recommended. OFF/STOP 4 5 SAFETY INSTRUCTIONS General Instructions - To ensure correct operation, user has to read this instruction manual to make himself familiar with the handling of the Brush Cutter/String Trimmer. Users insufficiently informed will risk danger to themselves as well as others due to improper handling. - It is recommended only to lend the Brush Cutter/String Trimmer to people who have proven to be experienced with Brush Cutter/String Trimmer. Always

- Change the place before starting the engine (at least 3 meters from the place of refuelling) (6). - Fuel cannot be stored for an unlimited period of time. Buy only as much as will be consumed in the near future. - Use only approved and marked containers for the transport and storage of fuel. Ensure children have no access to fuel. Putting into operation . Do not work alone. Another person must be nearby in case of emergencies (within shouting distance). . Children and other persons must remain

Always wear protective gloves. Do not attempt to remove the recoil starter by yourself, which may cause an accident. It should be done by the Authorized Service Agent. To ensure a long service life and to avoid any damage to the machine, the following servicing operations should be done at regular intervals. Daily checkup and maintenance Before operation, check the machine for loose screws or missing parts. Pay your special attention to the tightness of the cutting tool. Before operation, always

You are responsible for presenting your small off-road engine to an authorized service dealer or equipment manufacturer to whom Dolmar would sell engines as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30days. If you have a question regarding your warranty coverage, you should contact Dolmar Warranty Service Department at 1888- OPE-PART for the information. DOLMAR GmbH North American Division Emission Control Defects Warranty

Disposal of oil is regulated by law. In disposal, always follow the relevant laws and regulations. For any points remaining unknown, contact Authorized Service Agent. – Oil will deteriorate even when it is kept unused. Perform inspection and replacement at regular intervals (replace with new oil every 6 months). CLEANING OF AIR CLEANER DANGER: INFLAMMABLES STRICTLY PROHIBITED Interval of Cleaning and Inspection: Daily (every 10 operating hours) – Turn the choke lever to the full close side, and