- with the pulley turning, force the reverse belt out of the V-groove. - slide the belt free of engine pulleys and reverse belt guides. - pull belt down and away from transmission pulley. • install new reverse belt: - thread belt up from bottom. - place belt around transmission pulley in groove. - place belt under reverse belt guides. - gently pull engine recoil rope while forcing the belt over the edge of the engine pulley into the V-groove. • install new forward belt: - place forward belt in t

All Rights Reserved. Printed in USA. 5055 6 HP BRIGGS 5155 6 HP BRIGGS 6065Ve 6.5 HP VIPER ELECTRIC R5055H 5.5 HP HONDA OPERATING INSTRUCTIONS ANd PARTS ExPlOSIONS CRT Models INTROdUCTION WARRANTY ThANk YOU . . . for purchasing an Earthquake® forward rotating rear-tine rototiller from Ardisam, Inc. We have worked to ensure that this rear-tine rototiller meets high standards for usability and durability.With proper care, your rototiller will provide many years of service. Please take the time to

Oil level should be up to the bottom of the fill plug opening. 2. Always check oil level before starting engine. Refer to engine manual for capacity and type of oil to use. height adjustment holes lower handlebar mount 3/8-16 nuts 3/8-16 x 3/4” bolts handlebar stem gear case dipstick gear case dipstick hole NO ENGINE OIL! ! CAUTION DO NOT TRY TO LIFT THE ROTOTILLER FROM THE CARTON. DO NOT ADD ENGINE OIL INTO GEAR CASE DIPSTICK HOLE. IMPORTANT The rig ht an d left si des of your rototi ller are d