Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Desktops - HP Integrity NonStop H-Series (1.98 mb)
Desktops - HP Integrity NonStop H-Series (16.73 mb)
Desktops - HP Integrity NonStop H-Series (957.56 kb)
Desktops - HP Integrity NonStop H-Series (2.38 mb)
Desktops - HP Integrity NonStop H-Series (881.66 kb)
Desktops - HP Integrity NonStop H-Series (965.62 kb)
Desktops - HP Integrity NonStop H-Series (676.93 kb)
Desktops - HP Integrity NonStop H-Series (393.72 kb)
Desktops - HP Integrity NonStop H-Series (776.57 kb)
manual abstract
Manageability Products
New Password Configuration Attributes
PASSWORD-COMPATIBILITY-MODE
The new password configuration attribute PASSWORD-COMPATIBILITY-MODE is
used to determine whether a given user or alias is allowed to set passwords longer
than eight characters. This attribute is set to ON by default. When you migrate to the
H06.08 RVU, the longer password feature is not automatically enabled, and therefore
the user or alias is not able to set passwords longer than eight characters. This
attribute must be set to OFF to enable the longer password feature. This attribute takes
effect only during password change and does not impact authentication. When the
user or alias has set the password to more than eight characters, the user or alias is
authenticated against the longer password regardless of the PASSWORD-
COMPATIBILITY-MODE setting.
When the user or alias supplies more than eight characters for the new password
string and PASSWORD-COMPATIBILITY-MODE is ON during password change, only
the first eight characters of the supplied password are effective and the rest of the
password input string is discarded. A warning message is displayed stating that only
the first eight characters of the supplied password are accepted. Authentication
requests sent after this change consider only this eight character password.
When PASSWORD-COMPATIBILITY-MODE is OFF during password change, the full
password string (greater than eight characters) is effective and is considered for
subsequent user authentication.
PASSWORD-MAXIMUM-LENGTH
The other new password configuration attribute, PASSWORD-MAXIMUM-LENGTH,
specifies the maximum length allowed for the passwords being set or changed. This
attribute can be modified only when the PASSWORD-ENCRYPT attribute is set to ON
and the PASSWORD-ALGORITHM attribute is set to HMAC256. When
PASSWORD-ENCRYPT is set to ON and PASSWORD-ALGORITHM is set to
HMAC256, accepted values of PASSWORD-MAXIMUM-LENGTH are between eight
and 64 inclusive. The default value is 8.
There are special considerations. PASSWORD-MAXIMUM-LENGTH is reset to 8 when
PASSWORD-MAXIMUM-LENGTH is greater than 8 and one of these situations is true:
• PASSWORD-ENCRYPT is changed from ON to OFF.
• PASSWORD-ALGORITHM is changed from HMAC256 to DES.
PASSWORD-MINIMUM-LENGTH
The maximum value of PASSWORD-MINIMUM-LENGTH is increased from eight to 64
characters.
When either PASSWORD-ENCRYPT is set to OFF or PASSWORD-ENCRYPT is set to
ON and PASSWORD-ALGORITHM is set to DES, PASSWORD-MINIMUM-LENGTH
must have a value between 0 and 8. When PASSWORD-ENCRYPT is set to ON and
PASSWORD-ALGORITHM is set to HMAC256, then PASSWORD-MINIMUM-LENGTH
H06.08 Release Version Update Compendium — 543560-001
6 -2
...Other models in this manual:
Desktops - HP Integrity NonStop Release and Migration (102.33 kb)