Warmer models 8708, 8851, 8852, 8871 and 8872 are equipped with a cord and plug. They require a 115 - 125 volt 15 amp circuit (50/60 Hz, 2 wire plus ground, with NEMA 5-15R receptacle). WARNING: SHOCK HAZARD Brewer must be properly grounded to prevent possible shock hazard. DO NOT assume a plumbing line will provide such a ground. Electrical shock will cause death or serious injury. IMPORTANT: The ground prong of the plug is part of a system designed to protect you from electrical shock in the e
2. All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment. 3. Replacement of items subject to normal wear. Normal maintenance functions are not covered under warranty. 4. Proper attention, full care and maintenance will prolong the life of the machine. SHIPPING DAMAGE CLAIMS PROCEDURE SHIPPING DAMAGE CLAIMS PROCEDURE Note: For your protection, please note that the equipment in this shipment was carefully
763 p/ n 77719 OpManual Decanter Warmers Do not discard this appliance as usual trash at the end of its useful life. Recycle properly. AGENCY LISTING INFORMATION This warmer is listed under UL file E9253. C US C US This brewer meets Standard 4 only when installed, LISTED E9253 operated and maintained in accordance with the enclosed instructions. STD 4 3 INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION CAUTION: EQUIPMENT DAMAGE DO NOT plug i
1 FEATURES AND OPERATING CONTROLS FEATURES AND OPERATING CONTROLS POWER CORD WARMER PLATE WARMER SWITCH " I " INDICATES "ON" "O" INDICATES "OFF" OPTIONAL DECANTER (SHOWN FOR POSITION ONLY) SLIP-RESISTANT FEET Fig. 1 Features & Operating Controls Model 8852 shown. Features are similar for all models. 2 763 p/ n 77719 OpManual Decanter Warmers PRECAUTIONS AND GENERAL INFORMATION PRECAUTIONS AND GENERAL INFORMATION WARNING: ELECTRIC SHOCK HAZARD All servicing requiring access to non-insulated compo
O. Box 280 Verdi, NV 89439 telephone: 775-689-5707 fax: 775-689-5976 763 OPERATION MANUAL For Hot Plate-Style Decanter Warmer MODELS 8708 Dual In-Line Warmer 8851 Single Warmer 8852 Dual Warmer 8871 Single Warmer 8872 Dual Warmer Includes: Installation Use & Care Model 8702 Model 8852 Model 8871 NOTE: All warmers shown with optional 8900-Series Glass Decanters (available separately). 763 OPERATION MANUAL For Hot Plate-Style Decanter Warmer MODELS 8708 Dual In-Line Warmer 8851 Single Warmer 8852
These times are only approximate and will vary depending on the darkness setting. Your own experience with your product is your best guide to the best darkness setting. The slide rack raises automatically at the end of the timed cycle. Slide racks may be manually raised at any time during the timed cycle by lifting the slide knob. Each successive toasting cycle will require less time as the toaster chamber retains more heat. Adjust the darkness knob as required to maintain your desired toast col
Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery. IF SHIPMENT ARRIVES DAMAGED: 1. VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person. 2. FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage. 3. CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notif
This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location. This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware. This unit complies with NSF standard 4 only if maintained and operated per the instructions in this manual. This unit is Underwriters Laboratory listed under E6070. WARNING: ELECTRIC SHOCK HAZARD All
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS FRYER. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment. ELECTRIC PRESSURE FRYER MODEL WFPE-30F Part No. 301626 Rev (-) M362 111500 cps INSTALLATION, OPERATION AND MAINTENANCE MANUAL FOR WELLS MANUFACTURING COMPANY 2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439 Customer Service (775) 345-0444 Ext.502 fax: (775) 345-0569 362 LIMITED WARRANTY STATEMEN
IMPORTANT: Contact a licensed electrician to install and connect electrical power the broiler. Electrical installation must be performed by a licensed electrician in compliance with all local ordinances and code requirements. IMPORTANT: Damage due to being connected to the wrong voltage or phase is NOT covered by warranty. This broiler is not fused. Protect the circuit with properly sized fuses or circuit breaker. An electrical disconnect must be installed readily accessible to the operator of