MULTI-TASKER MANUAL PART NUMBER: 400-0092-005 MT104-102 6-IN, 1-OUT VGA SWITCHER CARD FOR MULTI-TASKERTM ENCLOSURES USER’S GUIDE MULTI-TASKER TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS...............2 GENERAL..........................................................2 INSTALLATION .................................................2 CLEANING ........................................................2 FCC / CE NOTICE.............................................2 ABOUT YOUR MT104-102 .......

INTERFACES MANUAL PART NUMBER: 400-0103-001 PRODUCT REVISION: 2 VA6822 SYSTEM INTERFACE WITH AUDIO & EQUALIZATION USER’S GUIDE INTERFACES TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS...............2 GENERAL..........................................................2 RACK MOUNT SAFETY GUIDELINES..............2 INSTALLATION .................................................2 CLEANING ........................................................2 FCC / CE NOTICE....................................

Command Format: [VERCnUi] Cn = card ID number (n = # from 1 to 19) 6 MULTI-TASKER Ui = Unit ID (i = # from 0 to 9) (refer to the MT100-100 user’s guide for explanation) Example: If one MT108-103 card is plugged in slot #2 of unit 3: Sending the command [VERC2U3], will yield the following feedback from the Multi-Tasker™ MT108-103 690-0127-007 MT108-103 = card type 690-0127-007 = software version 2. [C] This command receives the status of the card. Command Format: [CnUi] Cn = card id (n = from 1 t

DS801-111 General 400-0442-006 3 SPECIAL APPLICATION MECHANICAL DS801-111 Housing 0.036” Aluminum Front Panel 0.035” Steel Length 4.10 in (104 mm) Width 1.38 in (35 mm) Height 1.20 in (30 mm) Weight 0.25 lb (0.11 kg) T° Operating 10°C-50°C T° Maximum 75°C Humidity 90% non-condensing MTBF (calc.) 38,000 hrs ELECTRICAL DS801-111 Input Video+ Stereo Audio Video/Sync/Audio Signals ALTINEX Standard Output Video Analog Signal 1.0 Vp-p max. Video Sync Level TTL Audio Level 0 dB +/-0.5 dB at 1 KHz Power

Determine the best location for the DA1957CT. There is an equalization adjustment on the DA1957CT that will affect all the distributed signals. Therefore, place the DA1957CT as equidistant to all receivers as possible. Step 2. Connect the power adapter to the DA1957CT and plug it into the power outlet. The power indicator LED on the front panel will light red. This indicates that the unit is operational. Step 3. Connect a cable from the Twisted Pair transmitter to the Input connector on the DA19

Cable Lengths Note: Measurements made using ALTINEX low-skew cable, CB3150PV. VGA: 640x480@60Hz 900 ft (274 m) XGA: 1024x768@60Hz 700 ft (213 m) SXGA: 1280x1024@60Hz 650 ft (198 m) UXGA: 1600x1200@60Hz 600 ft (183 m) Table 1. MT107-303 General MECHANICAL MT107-303 Enclosure Slots Required 1 Weight 0.4 lb (0.18 kg) Connector Panel Black Anodized T° Operating 10°C-50°C T° Maximum 75°C Humidity 90% non-condensing MTBF (calc.) 38,000 hrs Table 2. MT107-303 Mechanical 400-0372-005 3 MULTITASKER ELECT

PATH OPERATION This command will set the path for the output, but it is not active until the switch command, [SW], is executed. Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card may be preloaded. Command Format: [OFFmCnP] m = Output no. (m = # from 1 to 4) Cn = Card ID (n = # from 1 to max slots) P = Path Example: There are two MT108-103 cards, C6 and C7. Disable Output 1 of C6 and Output 3 of C7 simultaneously using the following comman

These single ended signals allow the source to be distributed to large screen projectors or other displays with excellent quality at long distances. The DA1921SX is designed to be used together with a compatible CAT-5 computer video transmitter, such as model DA1920SX. The DA1921SX is connected to the transmitter using twisted pair CAT-5 UTP (Category 5, 5e, 6) type cable. The DA1921SX is compact and easy to use. It offers a CAT-5 input, two fully buffered outputs and equalization control. It is

Extremely rugged and compact, the DA1804NT fits easily into tight spots. Using high-quality 75 ohm coaxial cable, it can drive an NTSC signal 400 ft (122 m) or more. Specifications are subject to change. See for up-to-date information. FEATURES/DESCRIPTION DA1804NT GENERAL Inputs BNC female (1) Outputs BNC female (4) Compatibility NTSC, PAL, SECAM, High Resolution Monochrome Computer Video Table 1. DA1804NT General MECHANICAL DA1804NT Material Gray 0.1” Al Top Label Lexan Height (inches) 1.0 in

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. • Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment. 400-0378-004 2 SWITCHER ABOUT YOUR SW1956CT 2 TECHNICAL SPECIFICATIONS 3 SW1956CT 2-In, 1 Out Twisted Pair Auto-Switcher The SW1956CT is a 2-In, 1-Out Twisted Pair Auto-Switcher. Th