Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. • Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment. 400-0378-004 2 SWITCHER ABOUT YOUR SW1956CT 2 TECHNICAL SPECIFICATIONS 3 SW1956CT 2-In, 1 Out Twisted Pair Auto-Switcher The SW1956CT is a 2-In, 1-Out Twisted Pair Auto-Switcher. The SW1956CT switches automatically upon signal detection, but may also be controlled manually. The SW1956CT is designed to switch ALTINEX Twisted Pair transmitter and receiver signals. These include ALTINEX part numbers DA1930CT, DA1931CT, MT103-122, MT103-123, etc. The unit is encased in a solid metal enclosure and ships with an external, 9V power adapter. Also included is an external contact-closure switch for manual override of input selection. Manual override switching is made via a contact closure on the Input Select jack. This switch may be used for manual control, or the contact closure may be controlled from a control system. The SW1956CT is perfect for applications that use wall or floor plates for auto-switching. The SW1956CT may be mounted to furniture or other suitable surfaces using optional hardware. The latest generation of Twisted Pair devices uses an innovative, patented technology* developed by ALTINEX. The new signal processing technology allows transmitting and receiving fully equalized computer video signals, stereo, and audio signals over long distances. * US Patent 7,065,190 Specifications are subject to change. See for up-to-date information. FEATURES/ DESCRIPTION SW1956CT Inputs Input Connector RJ-45 female (2) Power 2.5mm DC jack (1) Outputs Output Connector RJ-45 female (1) Compatibility Signal Types ALTINEX Standard for Twisted Pair Video Signal Resolutions VGA through UXGA, 480p through 1080i Recommended Max. Cable Lengths Note: Measurements made using ALTINEX low-skew cable, CB3150PV. VGA: 640x480@60Hz 900 ft (274 m) XGA: 1024x768@60Hz 700 ft (213 m) SXGA: 1280x1024@60Hz 650 ft (198 m) UXGA: 1600x1200@60Hz 600 ft (183 m) Accessories Included Power Adapter +9 VDC, 500 mA Remote Switch Contact Closure Table 1. SW1956CT General 400-0378-004 3 SWITCHER MECHANICAL SW1956CT Material 0.100 in Al Finish Gray Height 3.000 in ( 76 mm) Width 4.380 in (111 mm) Depth 1.000 in ( 25mm) Weight 0.40 lb (0.18 kg) Ship Weight 2.00 lb (0.91 kg) T° Operating 10°C-35°C T° Maximum 50°C Humidity 90% non-condensing MTBF (calculations) 40,000 hrs (min.) ELECTRICAL SW1956CT Input Signal Analog Signal 1.0 Vp-p max Output Video Signals Analog Signal 1.0 Vp-p max Frequency Compatibility Horizontal 15-200 kHz Vertical 20-190 Hz Cross-talk -40 dB @ 10 MHz Coupling DC Power Consumption External Adapter: 9 VDC 350 mA (3 W max.) Table 2. SW1956CT Mechanical Table 3. SW1956CT Electrical 400-0378-004 4 SWITCHER 400-0378-004 5 PRODUCT DESCRIPTION 4 SWITCHER 400-0378-004 6 APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP DA1931CT SW1956CT DA1930CT DA1930CT ALTINEX includes a remote control switch with the SW1956CT. The remote switch has a 6 ft cable and may used to control the switcher manually. When the remote control switch is connected to the INPUT SELECT jack, INPUT 1 will be selected if the channel select contact is closed. INPUT 2 will be selected if the channel select contact is open. The switching will be identical whether there are one or two active signals. The LEDs located next to the input ports indicate which input is selected. SWITCHER DIAGRAM 2: INTERNAL VIEW INPUT2 9 VDC, 500 mA 2.5 mm SUPPLY POWER INPUT1 CLOUSURE CONTACT DETECT SIGNAL INPUT2 INPUT1 PAIR TWISTED RJ-45 TWISTED RJ-45 PAIR OUTPUT 400-0378-004 7 SWITCHER INSTALLING YOUR SW1956CT 6 OPERATION 7 Step 1. Connect the ALTINEX power adapter that is supplied with the unit to the power port. CAUTION: The POWER port and the INPUT SELECT port use the same connector type. Make sure the power adapter is connected to the POWER port. Step 2. The POWER LED and the INPUT 2 LED should turn on. Step 3. Connect the SW1956CT inputs to the outputs of the Twisted Pair transmitters. Step 4. Connect a cable from the output port of the SW1956CT to the input port of the Twisted Pair receiver. Step 5. If the remote control switch is to be used, connect it to the INPUT SELECT port. CAUTION: The POWER port and the INPUT SELECT port use the same connector type. Make sure the control switch is connected to the INPUT SELECT port. Step 6. Verify that the picture quality on the display is good. If a signal is not being received, make sure that the display is compatible with the resolution of the computer graphics card. There are no settings to adjust on the SW1956CT Auto-Switcher. The SW1956CT will operate successfully as long as cables are attached properly and other technical specifications are followed. AUTO-SWITCH MODE The SW1956CT automatically selects the INPUT ...