You may also have to remove screws to complete this step. Note: Before proceeding, make sure that the PIA Adapter has been programmed. Refer to the PIA Installation Manual. Professional installation is recommended. Step 2: Connect the 34-pin cable connector to the Programmable Interface Adapter (PIA) mating connector as shown in Figure 1. Slide the rubber strain relief onto the PIA case. Attach the Car Dock USB connector into the USB receptacle on the PIA. Make sure the connectors are secure, an
UPDATING: Radio is being updated with latest encryption code. normally. NO SIGNAL: XM signal is too weak or blocked at the current location. LOADING: Radio is acquiring audio or program information. OFF AIR: • Check whether the XM antenna cable is attached securely. • Wait until encryption code has updated. Channels 0 and 1 should function • Wait until the car reaches a location with a stronger signal or • Wait until the car is in an area that has a clear view of the open sky. • Wait until the r