The package contains three sets of crimping dies. Each set of dies is designed for different connectors and their marking and application are shown in the following table. Die Marking Cavity Marking Application BC/ST .151 ST* (BAYONET), FC-1, BICONIC .178 TECS (SMA) 200/230 .213 PROTECTIVE COVER-8500 SC sPLICE SC and FC-3 .120 2.4mm CABLE CRIMP RING .137 3.0mm CABLE CRIMP RING .190 KEVLAR CRIMP AREA PPST ST ( PUSH PULL) .120 2.4mm CABLE CRIMP RING .137 3.0mm CABLE CRIMP RING

**Singlemode connectors tested at 1310nm and 1550nm. ***Tested for 96 hours at 85°C, exceeding IEC standards. 3M™ ST Hot Melt Connector 2,9 mm 48,8 mm 10,4 mm 2,498 mm 9,7 mm 3M™ SC Hot Melt Connector 56,4 mm 8,9 mm 24,6 mm 2,498 mm 7,4 mm 2,9 mm 4,47 mm 50,27 mm 48,46 mm 28,78 mm 10,67 mm 3M™ FC Hot Melt Connector 2,9 mm 12,57 mm 6,25 mm 3M™ LC Hot Melt Connector 58,9 mm 9,1 mm 2,498 mm 50,27 mm 48,46 mm 28,78 mm 37,50 mm 35,70 mm 4,47 mm 4,47 mm 10,67 mm 10,67 mm LC UNIBODY DUPLEX CONNECTOR AS

4 Figure 1-1. The VOL-1081 Fiber Switch .........................................................................4 Features ...............................................................................................................................4 2. Hardware Description...................................................................................... 5 Front Panel...........................................................................................................................5