Votes - 2, Average rating: 4.5 ( )

Manafacture: Audiovox File size: 136.21 kb File name: CNPSON1_IM.pdf Language of manual:

You may also have to remove screws to complete this step. Note: Before proceeding, make sure that the PIA Adapter has been programmed. Refer to the PIA Installation Manual. Professional installation is recommended. Step 2: Connect the 34-pin cable connector to the Programmable Interface Adapter (PIA) mating connector as shown in Figure 1. Slide the rubber strain relief onto the PIA case. Attach the Car Dock USB connector into the USB receptacle on the PIA. Make sure the connectors are secure, and slide the top cover onto the bottom housing. (Refer to Figure 2.) Antenna Pass-Through Connector Note: Make sure all cables are securely connected. Mating Connector Connector To Head Unit Mini-Tuner and Car Dock Ground Wire Yellow Wire, 12V Battery Yellow and black wire are optional based on model. Left/Right Audio Cable Fuse Figure 1. PIA Cable Interface Installation (Continued) Installation (Continued)Installation (Continued)Installation (Continued)Installation (Continued)Installation (Continued) Step 3: Connect the end of the cable with the right angle DIN connector and audio cables to the back of the head unit as shown in Figure 2. The shorter end of the cable coming from the PIA is a pass-through cable that can be used to connect other products to your Left/Right Audio Cables (Model Specific) Connector Figure 2. Typical Head Unit, Rear View head unit, i.e., CD changer. Note: The location of the connections on the head unit may vary depending on the model. Step 4: Start your car and turn on your head unit to confirm that the XM Direct system is properly connected. Please refer to your stereo owners manual on how to access XM mode. When you tune to XM channel 1, you should see “XM Preview” on your head unit LCD, and hear that channel through your car speakers. If not, check to make sure all connections are correct or refer to the troubleshooting section of this installation guide. Step 5: Mount and secure the interface cable in a suitable location that will not interfere with the radio and will not vibrate or rattle after installation. Installation Basics/Installation Planning Figure 3. Smart Digital Adapter Installation (Continued)Installation (Continued)Installation (Continued)Installation (Continued)Installation (Continued) Step 6: Return the head unit to its original location in the dashboard. CAUTION: Note: the screws. Step 6: Return the head unit to its original location in the dashboard. CAUTION: Note: the screws. Ensure the cables are not kinked or get disconnected when installing the head unit. If you had removed screws to pull the car stereo head unit out, please reinstall Installation (Continued) Installation (Continued)Installation (Continued)Installation (Continued)Installation (Continued)Installation (Continued) Step 7: If you had removed the dash board during installation please return it back to its original location. (See Figure 4.) Figure 4. Typical Dashboard Installation Car Mounting Bracket Car Mounting (Alternate Position) Bracket Docking Station and Mini-Tuner Completing Activation: Now that your XM Direct system has been installed your XM Universal Tuner will need to be activated. Tune your car stereo head unit to the XM Preview Channel, channel 1 and follow instructions for activation. You can also go on-line at in the U.S. (in Canada) or call the toll free XM activation number at 1-800852- 9696 in the U.S. (1-877-438-9677 in Canada). XM SATELLITE RADIO OPERATION Please refer to the XM Radio Operation section of your owners manual. Installation Basics/Installation Planning/Cable Routing Cable Routing/Tools Required/Installation Procedure Troubleshooting TroubleshootingTroubleshootingTroubleshootingTroubleshootingTroubleshooting ANTENNA: The XM antenna is not connected to the XM tuner. UPDATING: Radio is being updated with latest encryption code. normally. NO SIGNAL: XM signal is too weak or blocked at the current location. LOADING: Radio is acquiring audio or program information. OFF AIR: • Check whether the XM antenna cable is attached securely. • Wait until e...

Download now

Please, enter two numbers from picture: