When the lid is closed, tabs in the lock bar engage the pockets on the drawers. When the lid is open, the tabs are raised clear of the pockets. Important: The drawer must be fully closed before the lid is shut. DO NOT slam the drawers when the lid is shut; they will not lock and damage to lock bar tabs or lock pockets may occur. Should this happen, remove the drawer and straighten out the deformed tab with a screwdriver. For the lock pockets, a pair of pliers should be used. See (1A) lock bar t

Read through this entire document before beginning the installation procedure on the next page. ACAUTION DO NOT operate the Model G1183/G1276 sander without an adequate dust collection system. This sander creates substantial amounts of wood dust while operating. Failure to use an adequate dust collection system can result in short and long-term respiratory illness. Shipping Inventory (Figure 1) A. Dust Chute.................................................1 B. Phillips Head Screws #10-24 x

setup unpacking your new mini rotary tool was carefully packaged for safe shipping. if you discover any damage after you have signed for delivery, immediately call Customer Service at (570) 546-9663 for advice. save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. When you are completely satisfied with the condition of the shipment, you should inventory the contents. inventory model t10165 inventory

1/09 and Later) T21323 Labels REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PLABEL-12C READ MANUAL LABEL 102 PT21323102 CRUSHING INJURY LABEL 103 PLABEL-11B SAFETY GLASSES LABEL 104 PT21323104 GRIZZLY DOMED LABEL 105 PT21323105 MACHINE ID LABEL AWARNING Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE t

#JB10625 printed in China ..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

There are many different types of flex hose on the market today. These are manufactured from materials such as polyethylene, PVC, cloth hose dipped in rubber and even metal, including steel and aluminum. There are also many kinds of pure plastic flexible hose, such as non-perforated drainage type hose and dryer vent hose. Drainage type hose, while being economical, does not quite have the flexibility required for dust collection. The inside of the duct is also deeply corrugated and can increase

Remove this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser. To clean thoroughly, some parts may need to be removed. Avoid chlorine-based solvents as they may damage painted surfaces should they come in contact. Awarning Gasoline and petroleum products have low flash points and could explode if used to clean machinery. DO NOT use gasoline or petroleum products to clean the machinery. ■w Floor Load The Model G0562 weighs 209 lbs and has a

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIzzLY INDUSTRIAL, INC. #TS11343 PRINTED IN TAIWAN

Always disconnect air when not in use, and do not carry tool with hand on trigger. 20. USE THE RECOMMENDED ACCESSORIES. Consult owner’s manual for recommended accessories. Using improper accessories may increase the risk of injury. 21. NEVER ALLOW UNTRAINED USERS TO USE THIS TOOL WHILE UNSUPERVISED. 22. IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP USING TOOL. Seek formal training or research books or magazines that specialize in pneumatic tools. 23. BE AWARE OF HOSE LOCATION. Hoses can easi