Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 3   File size: 475 kb   Manafacture: Contec  
Category: Other Tools
@name

Make sure a label is under the sensing area. 2. Depress the push-button until the green LED begins flashing at a slow rate (5 sec.), then release. If the green LED flashes at a fast rate it indicates that the label was not positioned correctly and you need to start over. 3. Jog 1 label. Missing Label Compensation is now enabled and should function correctly. Disabling Missing Label Compensation: 1. Depress the push-button until the green LED begins flashing (5 sec.), then release. . 2. Depress t

downloaded: 5   File size: 475 kb   Manafacture: Contec  
Category: Other Tools
@name

The holes are tapped for #8-32 screws and are 0.31" deep. We suggest using #8-32 x 3/8" stainless steel screws. Some different options are shown below. FORK * To avoid electro-static discharge and sensor malfunction, the CS2000 should be mounted to a grounded metal surface. If this is not possible, a grounding wire should be connected from one of the mounting screws to a suitable ground. - 5 Installation Installation CS2000 Wiring: The CS2000 comes with an 8' - 4 conductor cable. Refer below for

downloaded: 69   File size: 475 kb   Manafacture: Contec  
Category: Other Tools
@name

1 Diagram ........................................................................................................ 2 CS2000 Quick Start ........................................................................................ 3 CS2000-QD Quick Start ................................................................................... 4 Installation ............................................................................................................ 5 Mounting ................................





Category