To remove the battery pack from the tool, depress release buttons (B) on both sides, remove the battery pack (C). Insert it into the charger as described in the charger manual. Important Charging Notes 1. Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F(+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage

1342493 'Delta International Machinery Corp. 1999 INSTRUCTION MANUAL TABLE OF CONTENTS SAFETYRULES. ................................................................................................................................3 IMPORTANTSAFETYRULESFORDUSTCOLLECTORS. .............................................................4 INTRODUCTION. ................................................................................................................................4 UNPACKING.. ............

Follow the manufacturer’s instructions for use and safety. SERVICE REPLACEMENT PARTS Use only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.deltamachinery.com. You can also order parts from your nearest factory-owned branch, or by calling our Customer Care Center at 1-800-223-7278 to receive personalized support from highly-trained technicians. FREE WARNING LABEL REPLACEMENT If your warning labels become illegible or are missing, call 1-800-223-

6 CARTON CONTENTS 1 2 Fig. 1 1. Motor and blower assembly 2. Stand 3 4 5 6 7 8 9 Fig. 1A 3. Dust intake port 4. Cloth-covered bag retainer ring (2) 5. One micron upper filter bag (2) 6. Six mil plastic lower bag (4) 7. Legs (2) 8. Bag retainer clamp (2) 9. Bag hanging rod (2) 7 1011 12 13 14 15 1617 1011 12 13 14 15 1617 Fig. 1B 10. Caster (4) 11. Intake cap and ring (3) 12. Bracket for bag hanging rod (2) 13. Knob for attaching legs to blower/motor assembly (4) 14. 3/8” (9.5mm) Lockwasher for a

Accessories Recommended accessories for use with your tool are available for purchase from your distributor or local service center. CAUTION: The use of any non-recommended accessory may be hazardous. Important To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts. Full Warranty DEWALT heavy duty indu

581054-00 D25101, D25103, D25201, D25203, D25303, D25304 Copyright © 2003 The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. Questions? See us Wide Web at INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA INSTRUCTION MANUAL DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE

J Protect the charger, battery pack and the drill/ grinder from moisture. J Warning! Do not use the drill/grinder with chargers or batteries other than the charger/ battery pack supplied. J Warning! Never short circuit the battery pack. Overheating, fire or destruction of the battery pack may result. Therefore: -Do not connect any wires to the battery pack poles. -Take care that no metal objects (nails, screws, etc.) can short circuit the battery pack connectors. J m Attention! Never throw the b

A22946 - 06-06-07 - Rev. A Instructivo de operacion, centros de servicio y poliza de garantia. ADVERTENCIA: Lease este instructivo antes de usarel producto. DEFINITIONS - SAFETY GUIDELINES indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. indicates a potentially haz ard ous situation which, if not avoided, may result in minor or mod

Use only 3-wire extension cords that have 3-prong grounding type plugs and matching 3-conductor receptacles that accept the machine’s plug, as shown in Fig. A. Repair or replace damaged or worn cord immediately. 2. Grounded, cord-connected machines intended for use on a supply circuit having a nominal rating less than 150 volts: If the machine is intended for use on a circuit that has an outlet that looks like the one illustrated in Fig. A, the machine will have a grounding plug that looks like

RELEASE TRIGGER IMMEDIATELY, remove drill bit from work, and determine cause of stalling. DO NOT CLICK TRIGGER OFF AND ON IN AN ATTEMPT TO START A STALLED DRILL – THIS CAN DAMAGE THE DRILL. 5. To minimize stalling or breaking through the material, reduce pressure on drill and ease the bit through the last fractional part of the hole. 6. Keep the motor running when pulling the bit back out of a drilled hole. This will help prevent jamming. 7. With variable speed drills there is no need to center