2.4.2 Setting the autoscan dwell time The AdderView may be made to autoscan the connected computers. During autoscan the AdderView displays the video signal from each computer in turn for a selected time period. This time period is known as the dwell time and may be selected to be 2 or 5 seconds using option switch 7. Ports are scanned in ascending numerical sequence and all the ports or just the active ports will be scanned according to the setting of option switch 8. AdderView USB Installation

For example, if you are printing from the old computer and you switch to a new computer before the print job is complete then only part of your print job will actually be printed. In particular you should avoid switching computers whilst a computer is reading or writing data to a USB data storage device such as a ZIP drive. Where practical it is adviseable to eject removable disks on USB drives before switching computers. 3.4 Status display The status display usually shows the currently selected