It's unique combination of Improved Lift and Cut® technology with NIVEA for Men shaving lotion guarantees a closer, smoother, more refreshing shave with less irritation • ULTRA CLOSE - Nivea for Men shaving lotion prepares and softens the beard hair so that the improved Lift and Cut® dual blade system can cut closer • ULTRA COMFORTABLE - Nivea for Men shaving lotion softens the skin and hair so that razor heads can glide easily over the face for a smoother, more comfortable shave • ULTRA REFR

1 Turn razor to OFF (O) position and disconnect from outlet. C 2 Press the Razor Head Release Button and remove Razor Head Assembly from the razor unit. C 3 Brush the inside of the razor housing. 4 Turn Razor Head Assembly over so that underside is exposed. C 5 Turn wheel of frame counterclockwise. 6 Remove the frame and brush clean. 16 ENGLISH C 15 C C C Replace the Razor Head Assembly back on razor. 16 Put the protective razor head cap on the razor to protect heads. After Each Use: Trimmer 1 2

............................19 Spanish ............................................................20 Table of Contents 8 ENGLISH ENGLISH 9 Features Reflex Plus Shaving System Razor Head Assembly Protective Razor Head Cap Individually Floating Heads Razor Head Release Button • Hair Chamber captures shaven hair Locking ON/OFF Switch LED Charge Indicator Light Built-in Charger Full Width Pop-Up Trimmer Automatic Worldwide Voltage 100V to 240V AC Cleaning Brush Travel/Storage Pouch Rechargeable 16

Storage . Be sure razor is turned off. Remove cord from outlet and razor before storing in a safe, dry location where it will not be crushed, banged, or subject to damage. . Do not wrap cord around razor when storing. . Store cord in a safe location where it will not be cut or damaged. . Do not place or store razor where it can fall or be pulled into a tub or sink, water or other liquid while plugged in. . Put the Protective Razor Head Cap on razor to protect heads. ENGLISH 19 FULL TWO YEAR WARR

8 Separate the cutter from the comb. C 9 Only brush the cutter in an upward motion. Use the short bristled side of the brush. C 10 Brush the slots of the comb. For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Head Cleaner, model RC1776 or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).This helps prevent wear of the shaving heads. C 11 Replace the cutter and comb

. Shaving with a clean, dry face gives the best results. 1 2 Turn razor to ON (1) position. Shave against the direction of beard growth using both straight and circular movements. Stretch your skin with your free hand so blades can lift and cut whiskers. Gently press razor to skin, so the floating heads can follow the contours of your face. DO NOT press too hard. Too much pressure can pinch the skin into the heads. 3 4 Turn razor to OFF (O) position. Put the protective razor head cap on the razo

All Rights reserved. PHILIPS Version: 2.0.1 12 NC: 0000 000 00000 Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

7 8 If the shaving unit becomes detached from the razor, you can easily reattach it. You may also clean the hair chamber without water by using the supplied brush. ENGLISH 19 Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. C 6 Replace the set back into the Razor Head Assembly so that the ‘wings’ on the comb fit within the brack

When the batteries have been fully charged, the top light blinks green. When the battery is running low, the bottom light on the display lights up red. When you turn the razor OFF, the bottom light will blink a few times. Before first use . Charge the razor before you start using it (see ‘Charging’). Make sure the razor is switched off before you start charging it. Important . Only use the power plug and/or charging stand provided to charge the razor. . The charging plug converts 100 – 240V AC t

Do not use attachments not recommended by Philips Electronics North America Corporation. 3. Never operate this razor/charging stand if it has a damaged cord or charging plug, if it is not working properly, if it has been dropped or damaged, or dropped into water while plugged in. Return the razor/charging stand to an Authorized Norelco Service Location for examination and repair. ENGLISH 4. Keep the razor, charging stand, cord and charging plug away from heated surfaces. 5. Never drop or insert