Whether it is in the office, restaurant, hotel room, taxi or bus, hospital or elderly-care home, bad odours make life unpleasant for workers and visitors alike. The Nilfisk OZ 1 is a professionally designed air cleaner that effectively removes odours, it doesn't merely mask them! Compact, lightweight and virtually maintenance-free Effective for everyday odour removal & fire restoration Eliminates odours, not just covers them Effective for areas up to 1200 m3. Ozone is the strongest oxidant com

2 Nameplate.......................................................................... 2 Unpacking the Machine ..................................................... 2 Assembly ........................................................................... 4 Operation ........................................................................... 8 Maintenance ...................................................................... 9 Pagina Introduccion ......................................................

WARNING! To reduce the risk of fire, electric shock, or injury: • Do not leave the machine unattended when it is plugged-in. Unplug the unit from the power outlet when not in use. • Unplug the machine from the power outlet before cleaning or servicing. • Turn off all controls before unplugging. • To avoid electric shock, do not expose to rain or snow. Store and use indoors. • Wear hearing protection if desired. The measured sound level of the HSC585 is 75 dB(A) • Do not allow to be used as a toy

Clean the water inlet filter regularly once a month or more frequently according to use. Carefully loosen the filter with a screwdriver and clean it. Check that it is intact before re-mounting it. The inlet filter must always be fitted inside the water inlet pipe to filter out sand, limestone and other impurities, as they will damage the pump valves. CAUTION: Failure to fit the filter will invalidate the guarantee. A clogging up in the nozzle causes a pump pressure which is too high. This is why

The machine will restart after a few minutes when the thermal sensor has cooled. 4 2 Description 2.1 Application 2.2 Operation elements and model survey This high-pressure washer has been developed for domestic use within: - Car, motorbike, boat, caravan, trailer, patio/drive/flagstones, woodwork, brickwork, barbecue, garden furniture, lawn mower See illustration at the end of this manual. 1 Start/stop switch 2 Water inlet with filter (2a) 3 High pressure connection 4 High pressure hose 5 Electr

Safety instructions marked with this symbol must be observed to pre vent danger to persons. • This symbol is used to mark safety instructions that served to prevent ..must be ob damage to the machine and its performance. This symbol indicates tips and instructions to simplify work and to ensure a safe operation. Do not let people who have not been trained in the use of a high pressure washer nor read the instruction manual ope rate the machine. This appliance is not intended for use by children

Task Accessories Cleaning method Car Tornado® PR noz- zle, auto brush, underchassis spray lance, Car Combi Cleaner 1. Apply Car Combi Cleaner. Always start from the bottom and work upwards. Let Car Combi Cleaner act for at least 5 min. 2. Wash the car with the Tornado® PR nozzle. Start at the front of the car and work backwards to avoid water from penetrating by the door mouldings. 3. Use the brush for removal of traffi c film which is not removed by the nozzle. If the car is very dirty, apply C

Nilfisk P 130.2/150.2/160.2 User Manual Copyright © 2011 Nilfisk, Division of Nilfisk-Advance A/S Nilfisk P 130.2 / P 150.2 / P 160.2 Index EN 1 Safety precautions and warnings .............................................3 2 Description ...............................................................................5 3 Before you start using your pressure washer ...........................6 4 Operating your pressure washer ..............................................7 5 Fields of application a

2. Attach the nozzle. 4.3 Water connection An ordinary 1/2" garden hose of min. 10 m and max. 25 m will be suitable. NOTE: Connection to the public mains according to regulations. IMPORTANT! Only use water without any impurities. If there is a risk of silt, sand or sediment in the inlet water (i.e. from your own well), an additional fi lter should be mounted. 1. Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrating the machine. Not

17 FUSE BOARD ................................................................................................................................................. 17 RELAY BOARD .............................................................................................................................................. 17 WIRING DIAGRAM ......................................................................................................................................... 17 HYDRAULIC DIAGRAM .....