This ground point should ideally be an engine block ground. 4. Connect the gauge’s GREEN wire to the LC-l’s Brown analog output 2. The gauge is setup to work with the LC-l’s analog output 2 factory default setting of Ov = 7.35 A/F and 5v = 22.39 A/F. 5. Connect the WHITE wire to a headlight power wire (a wire that supplies current to the headlights). 6. Connect the gauge’s BLUE wire to a switched 12 volt source (ignition switched). Optional Tip/Trick (requires connection of LC-l to PC) The

This can be done by connecting the LC-l to the computer and launching LM Programmer. The warm-up and error condition options for the analog output are under the Advanced... settings. For example, if you setup the error condition at 5 V your gauge will display full lean if any problem arises. Please refer to chapter 6.5.1 in the LC-l manual for further information. ilNVOVATS 11-0115B.doc 1/WO VAT M w G2/G4/G5 Air/Fuel Gauge LM-l Quick Start Guide The LM-l's analog output cable has three e

Setup analog output 2 as Ov = 7.35 A/F and 5v = 22.39 A/F. Lastly click on the "Program” button. , LM Programmer Version 3.15 Info/Set AFR | Analog Out 1 Analog Out 2 | RPM-Converter | 1 nn 1.DD Output Ü.DDC Volt at AFP: 7.35 and p.EDO Volt at AFR: 22.35 C use Lambda (• use airfuekatio Factory Defaults Advanced... Program