#186 413 For .030/.035 in (0.8/0.9 mm) wire. Push Roll (1) #199 732 For .023 in (0.6 mm) wire. #186 414 For .030/.035 in (0.8/0.9 mm) wire. Consumables For Spool Gun 3545-20 Note: Spool Gun 3545-20 shipped with (3) .035 in and (3) .047 in contact tips. Contact Tips (5 per package) #199 387 For .030 in (0.8 mm) wire. #199 388 For .035 in (0.9 mm) wire. #199 389 For .047 in (1.2 mm) wire. Nozzle #199 386 Drive Roll (1) #186 413 For .030/.035 in (0.8/0.9 mm) wire. #199 396 For .047 in (1.2 mm) wire

These reliable, yet economical guns provide 20 ft (6.1 m) of cable and gas hose for extended reach. The 3035-20 and 3545-20 spool guns feature easily accessible drive rolls with a screw-style tension adjustment and smooth feeding of aluminum, steel and stainless steel wires Comes Complete With: 20 ft (6.1 m) cable and gas hose Threaded nozzle and contact tips Spool gun conversion kit consisting of control switch and gas diverter valve Enclosed wire spool compartment with internal spool hub tensi

REV101805 ELECTRICAL SPECIFICATIONS Input Voltage ....................................................................90 to 128 VAC or optional 180 to 264 VAC, 50/60 Hz Drive Current Per Phase ............................................................................2 to 10 Amps Peak (Max 7 Amps RMS) Isolated Logic Inputs................................................... Step Clock, Direction, Enable, Reset, Microstep Resolution 0–3 Step Frequency (Max) .......................................

(2.4 m) H-9B gun 10-ft. (3 m) work cable with clamp Sample spool of .030 in. (0.8 mm) self-shielding flux-cored wire224820 March 2012 The Handler 125EZ has Hobart’s unique single-knob EZDial, making it the quickest and easiest wire welder to set up and use. Just plug it into 115 VAC, select the mild steel thickness with the EZDial and you are ready to weld. The Handler 125EZ comes ready to weld 18 ga. to 3/16 in. mild steel with .030 in. (0.8 mm) self- shielding flux-cored wire so no shielding g

Fully varnished magnetic coils Varnish protects and lengthens the life of the coils inside for increased reliability. Forced-draft cooling fan The cooling fan runs continuously and helps to extend the life of the power source. Hobart’s 5/3/1 Warranty Five-year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers); and one year on guns. Mode AC DC Rated Welding Output 225 A at 25 VAC, 20% Duty Cycle at 60 Hz 15% Duty Cycle at 50 Hz 150 A at 25

AC output produces less arc blow and easier starts. Accu-Set™ design provides accurate heat control with infinite amperage control. This Stick welder also allows a higher duty cycle when amperages decrease to give you more arc time when welding thinner materials. #500421 230 Volt Stickmate® LX 235 AC/160 DC AC/DC Stick (SMAW) Arc Welding Power Source Applications: Farms Hobbyists Ranches Maintenance Ornamental Iron Individuals GaragesIncludes: 211809 June 2012 The Stickmate LX 235 AC/160 DC powe

. . . . . . . . . . . . . . . . . . . . . . . 1 1-1. Symbol Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2. Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SECTION 2 . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SECTION 3 . OPERATING INSTRUC

For 25 and 25T Models, install handle onto either side as desired for either righthand or left-hand use. Tools Needed: 2 Ref. ST-802 056-A 7/16, 3/8 in All HSW 25 Models All HSW 15 Models 1 2 1 2 1 3 OM-715 Page 10 Return To Table Of Contents 4-5. Connecting Input Power Ref. ST-800 156 Input power supply wiring and receptacle must meet National Electrical Code and all other code requirements. Operate spot welder from a separately fused or circuit breaker protected circuit, and use correct size

. . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . . 1 ... 22. . . . . . . . . . . . . 026 607 . . GUARD, spatter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . . 1 ... 23. . . . . . . . . . . . . 122210 . . SCREW, 10-32 x .625hexwhd slt stl . . . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . 4 ... 24. . . . . . . . . . . . . 070 017 . . INSULATION, switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . .

3. Reinstalling auto.darkening lens assembly . Gently place auto. darkening lens in front of helmet. (Be careful not to drop lens.) Install front lens cover with gasket. Grasp front lens holder and slowly insert the six retaining pieces into front of helmet. (Make certain you gently squeeze the outside edges of the front lens holder while inserting tabs into helmet.) From the inside of helmet, gently push the retaining tabs in to secure the front lens holder in place. Page 7 SECTION 4 . BATTERY