This kit contains a complete PSoC Express development environment including a large, full featured development board, fan modules, proto modules, 28-DIP samples, and a MiniProg Programmer. CY3235-PROXDET: The CapSense Proximity Detection Demonstration Kit allows quick and easy demonstration of a PSoC® CapSense-enabled device (CY8C21434) to accurately sense the proximity of a hand or finger along the Kit Includes: • Development Board • Four Fan Modules • Two Proto Modules • MiniProg Insystem leng

Kit Includes: • PSoCEvalUSB Board • LCD Module • MiniProg1 programmer • USB mini cable • Documentation and Soft ware 428-1650-ND Evaluation Kit for CY8C24794-24LFXI ................................................. $98.99 CapSense™ Express Evaluation Kits The CapSense Express evaluation kits enable designers to replace mechanical buttons by implementing touch sensing designs in minutes with the newest CapSense Touch Sensing Family, CapSense Express. With Cypress’s PSoC Express™ visual embedded s

It also offers a breadboard module and a module for implementing up to five buttons and a slider with sample overlays to encompass a wide variety of designs. Kit Includes: • Universal Capsense Controller Boards • CapSense Linear Slider Module • CapSense Protyping Module • CY3240-I2USB Board • CY3210 MiniProg1 Programmer • Software 428-2033-ND Universal CapSense Controller Kit ................................................... $177.00 PSoC® I2C to USB Bridge Kit CY3240-I2USB: The I2C to USB Brid

There is no direct pin for pin replacement for the CY2907. The CY22392 is the closest match in functionality to the CY2907. Introduction The CY22381, shown in Figure 1, is programmed using CyClocks RT that is part of the CyberClocks software suite. The CY2071A, shown in Figure 2, and CY2907 family of devices are programmed using the PC driven CyClocks software that is also part of the CyberClocks software suite. CyClocks software stores the program file as an entry file that uses a text file wit

Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the

P u ll-u p Freq. Phase Modulating VCO Post CLKOUT Detector Charge Pump Waveform Dividers Divider Feedback Divider PLL GND VDD . M N Clock Input (SSCG Output) REFOUT Logic Control SDATA SCLOCK PWRDWN# Cypress Semiconductor Corporation • 3901 North First Street • San Jose, CA 95134 • 408-943-2600 Document #: 38-07531 Rev. ** Revised March 18, 2003 [+] Feedback CY25822-2 Pin Description Pin No. Pin Name Pin Type Pin Description 1 CLKIN Input 48-MHz or 66-MHz Clock Input. 2 VDD Power Power Supply fo

*B Revised October 26, 2005 [+] Feedback CY25566 Pin Description Pin Name Type Description 1 XIN/CLKIN I Clock or Crystal connection input. Refer to Table 1, Table 2, and Table 3 for input frequency range selection. 2 REFOFF I Input pin enables REFOUT clock at pin 3. REFOFF 400K. internal pull-up resistor. Logic “0” enables REFOUT, logic “1” disables REFOUT. Default = disabled. 3 REFOUT O Buffered, non-modulated output clock derived from XIN/CLKIN input frequency. There is a 180° phase shift fro

–65°C to + 150°C Input Voltage Relative to Vdd:.............................. Vdd + 0.3V Table 4. DC Electrical Characteristics Vdd = 3.3V ±10%, TA = 0°C to +70°C and CL = 15 pF (unless otherwise noted) Parameter Description Conditions Min. Typ. Max. Unit Vdd Power Supply Range 2.97 3.3 3.63 V VINH Input HIGH Voltage S0 Input 0.85 Vdd Vdd Vdd V VINM Input MIDDLE Voltage S0 Input 0.40 Vdd 0.50 Vdd 0.60 Vdd V VINL Input LOW Voltage S0 Input 0.0 0.0 0.15 Vdd V VOH1 Output HIGH Voltage IOH = 4 ma, S

. *B Revised April 11, 2006 [+] Feedback CY25818/19 . Pin Description Pin Name Description 1 XIN/CLK Clock, Crystal, or Ceramic Resonator Input Pin. 2 Vss Power Supply Ground. 3 S0 Digital Spread% Control Pin. 3-Level input (H-M-L). Default = M. 4 SSCLK Modulated Spread Spectrum Output Clock. The output frequency is referenced to input frequency. Refer to Table 2 for the amount of modulation (Spread%). 5 REFCLK Unmodulated Reference Clock Output. The unmodulated output frequency is the same as t

Absolute Maximum Ratings this circuit. For proper operation, VIN and VOUT should be constrained to the range, VSS < (VIN or VOUT) < VDD. All digital inputs are tied high or low internally. Refers to electrical specifications for operating supply range. Parameter Description Min. Max. Unit VDD Operating Voltage 3.0 6.0 VDC VIRvss Input, relative to VSS –0.3 VDD + 0.3 VDC VORvss Output, relative to VSS –0.3 VDD + 0.3 VDC TOP Temperature, Operating 0 +70 °C TST Temperature, Storage –65 +150 °C TJ T