7-2. Clearing the Input Buffer In case it is desired to delete the data in the input buffer, the power switch should be turned on while pressing the SEL switch. When deletion of the buffer is completed the buzzer will sound. Please be sure to continue pressing the SEL switch until that time. If the printer fails to work properly at the time the power switch is turned on, please delete the input buffer as described above before inputting new data. CITIZEN 18/48 iDP-3540/41 User’s Manual 8. Parall
or other equivalent Core : O12 mm (inner diameter), O18 mm (outer diameter) [Caution] Do not paste the paper to the core. 2.3.2 Printing Position 2.3.3 Head and Cutter Positional Relations CITIZEN 9 CBM-230/231 User’s Manual 3 APPEARANCE AND COMPONENT PARTS CITIZEN 10 CBM-230/231 User’s Manual 4 OPERATION 4.1 Connecting the Interface Cable 1. Turn off the power. 2. Confirm the vertical direction of a cable terminal and connect it to the interface connector. 3. Fix the cable terminal. Serial inte
In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This declaration is applied only for 230V model. CITIZEN CBM-230/231 User’s Manual IMPORTANT SAFETY INSTRUCTIONS • Read all of these instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cl
4 User Safety Instructions ................................................................................................................. 5 Introduction ...................................................................................................................................... 6 About This Printer Manual .............................................................................................................. 6 What to do if you have problems.....................................
[4] The assignment of RS-232C/Current loop/TTL can be performed with the preset jumper (Refer to 10. Slide Switch Setting). Compatible Connector (D-Sub connector) : *Printer: 17LE-13 250 (AMPHENOL or equivalent) *Cable Side: 17JE-23 250 (AMPNENOL or equivalent) 26 CITIZEN CBM-710/720/730/750 User’s Manual 9.3 Description of Input/Output Signals (1) Input/Output Signals a) RD : This is the serial signal for received data. When framing, overrun or parity errors occur, the data concerned are ignore
CBM-710/720/730/750 User’s Manual Declaration of Conformity Manufacturer’s Name : Japan CBM Corporation Manufacturer’s Address: CBM Bldg., 5-68-10, Nakano, Nakano-ku Tokyo, 164-0001, Japan Declare the Product Product Name: Dot Matrix Printer Model Number(s): CBM-710,720,750 Series (CBM-710R, CBM-710P, CBM-720R, CBM-720P, CBM-750R, CBM-750P) (S.No.0090001 ~ ) Conform to the following Standards: LVD: : EN60950 : A4:1997 EMC: : EN55022 : 1998 Class A : EN61000-3-2 : 1995+A1:1998+A2:1998 : EN61000-3
80 mm (Dia.) 3.0 inch (W) . 3.0 inch (Dia.) Pin Wheel Type: 76 ~ 89 mm (W) 3 ~ 3.5 inch (W) 8 Interface P: Parallel interface (8 Bit) R: Serial interface (RS232C, 20 mA current loop) X: Serial interface (RS422A)*2 9 Input buffer 7K bytes or 2 line buffer 10 Input buffer back-up N Type: Without back-up. B Type: Duration of back-up: More than 100 hours. (But after 10 minutes operation) 11 Paper end detection When paper is near the end, the buzzer actuates and print operation is interrupted, or PE
FCC Declaration of Conformity This printer conforms to the following Standards: Regulation : FCC Part 15B, Class B Test Method : CISPR22: 1997 and therefore is in compliance with the protection requirement of FCC Rules relating to electromagnetic compatibility. CITIZEN is registered trade mark of CITIZEN WATCH CO., LTD., Japan CITIZEN es una marca registrada de CITIZEN WATCH CO., LTD., Japon ESC/POS is a trade mark of Seiko Epson Corporation. Compliance Statements Compliance Statements FCC Compl
Compact size . 4-line LCD offers easy operation . Quick warm-up (10 seconds for basic copier recovery time) . Scan to E-mail feature . Duplex capability Mid to large offices as a work group fax or division printer or scanner Scanner features are available on printer option (Scanner & Printer option). Replace stand-alone fax machines. Install Printer & Scanner option to acquire print volume. All-inone (copier, fax, printer and scanner) multi-function product to be used in mid to large offices Mid
To protect the service life of the thermal head, use the following printing rate as a guideline; use the fixed split (6-split) method. 1. Continuous print of high-energy print only : 6 % or less 2. Mixed continuous print of low-energy and high-energy print : 30 % or less of the standard printing rate of 12.5 % 3. Printing rate per dot line : 50 % or less (3) Minimum dots for high-energy print When high-energy print is used, the recommended minimum area is 3 dots (length) . 3 dots (width) or more