The faceplates are made of 1/16” thick stainless steel for durable use. 1. Determine the mounting location of the pushplate. Use the enclosed mounting template if the pushplate is to be attached directly to the door jamb, otherwise, the pushplate will mount directly into a jamb-style box with a 3 %” hole spacing. 2. If the pushplate is to be mounted directly to the jamb tube, use the template and mark the drill locations by tapping the holes with a hammer and center punch. Then proceed to dril

The faceplates are made of 1/16” thick stainless steel for durable use. 1. Determine the mounting location of the pushplate. Use the enclosed mounting template if the pushplate is to be attached directly to the door jamb, otherwise, the pushplate will mount directly into a jamb-style box with a 3 %” hole spacing. 2. If the pushplate is to be mounted directly to the jamb tube, use the template and mark the drill locations by tapping the holes with a hammer and center punch. Then proceed to dril

FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS, CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM E3EA PNIWM

^ Input 1 and Input 2 are activation inputs for Door 3 and Door 4 respectively Input 3 is the door position switch for Input 1 (Door 3).Input 4 is the door position switch for input 2 (Door 4) if used. \Switch is closed when door is closed. MC-LINX2 # 2 0® POWER OUTPUT OPTION SETUf» □ □ 12 to 24 VAC/VDC +/- 10% , (SEE NOTE #1) DOOR 1 DOOR 2 DOOR 3 DOOR 4 V DPS DPS DPS DPS POWER OUTPUT OPTION SETU£ □ □ Output A directly to Activation Circuit of Door Control #1. Output B directly to .A