The major drawback ist that this type of modulation is ‘analog’ which is the reason for the poor performance of analog transmitters. If you listen carefully to a CD over an analog wireless audio transmitter / amplifier, you will notice significant noise/static, low signal dynamics and low channel separation. Also, the signal quality will vary when you move around the room between the transmitter and receiver (the noise will increase locally and also the further the receiver is moved away from th

The recovered audio signal will pass a digital as well as an analog filter stage to eliminate out-of-band components and is amplified to the maximum output power of 40 W to drive a speaker unit. By receiving the signal in a digital format, noise and quality losses that are inherent with conventional analog systems are avoided. The Model 1040 receiver/ amplifier will apply forward error correction to the received signal in order to maximize reception robustness. A built-in voltage step-up conv

The recovered audio signal will pass a digital as well as an analog filter stage to eliminate out-of-band components and is amplified to the maximum output power of 200 W to drive a speaker unit. By receiving the signal in a digital format, noise and quality losses that are inherent with conventional analog systems are avoided. The Model 1200 receiver/ amplifier will apply forward error correction to the received signal in order to maximize reception robustness. The amplifier is a digital (cl

Most audio devices provide a line-out interface. If no line-out interface is available, the transmitter can also be connected to other audio outputs by using an appropriate adapter. It should be noted that the audio level of the audio output should conform to the standard line output level (V pp ± 2.8 V maximum). If the audio level is too low, the dynamic range of the transmitter is not fully used. If the audio level is too high, clipping at high audio levels may occur. If clipping occurs, eithe

4 Connecting on Mono configuration ....................................... 6 Technical specifications ........................................................ 8 Safety information ................................................................ 9 Your warranty ...................................................................... 11 User and Installation Guide Unpacking: Check that this package contains: -one digital audio amplifier -Model 100 -one large AC adapter (wallwart) Thank you for purch

operating range of 100 feet • Multiple headphones can operate simultaneously • Ergonomic headphone for maximum comfort Technology Comparison to Bluetooth: Amphony Bluetooth Transmit frequency 5.8 GHz 2.4 GHz Transmitted audio data rate > 3 Mbps 100 kbps ... 300 Audio compression Uncompressed Bluetooth Audio Maximum operating range 100 ft. 30 ft. Battery life 100 hours < 10 hours Multiple headphones can operate from initial transmitter \/ X Audio delay (latency) < 1 ms > 10 ms

products from Amphony.products from Amphony. By transmitting the audio in a By transmitting the audio in aBy transmitting the audio in a digital format digital formatdigital format at 5.8 GHz, the Digital at 5.8 GHz, the Digitalat 5.8 GHz, the Digital Wireless Audio Transmitter / Amplifier from Amphony allows you Wireless Audio Transmitter / Amplifier from Amphony allows youWireless Audio Transmitter / Amplifier from Amphony allows you to eliminate the hassle of wires and is fully immune to inte

Product Information Product InformationProduct Information RR 5.8 GHz 5.8 GHz5.8 GHz DIGIT DIGITDIGITAL Wireless AL WirelessAL Wireless Audio T Audio TAudio Transmitter / ransmitter /ransmitter / Amplifier AmplifierAmplifier CD Quality Model 1550 Model 1550Model 1550 Tired of wiring your speakers ? Don’t like the look of long speaker cables of your home Tired of wiring your speakers ? Don’t like the look of long speaker cables of your homeTired of wiring your speakers ? Don’t like the look of lo

Digital Audio Interface The transmitter accepts a digital audio signal at both the electrical and optical digital interface. By using one of the digital interfaces, audio data can be fed directly into the transmitter. This bypasses the digital-to-analog and analog-todigital conversion and thereby eliminates audio distortion. Many HiFi components provide a digital audio interface. The format of the digital audio which is fed into the transmitter must be uncompressed S/PDIF stereo data at a sampli

The wireless receiver measures 5 x 3.5 x 2 inches only and easily mounts to a speaker. Application Model 1550: Passive Speakers 5.8 GHz Digital • Two wireless mono amplifiers with 50-Watts peak output power per channel • No audio compression • Only 0.05 % total harmonic distortion • Amplifiers connect directly to loudspeakers Actual size of wireless amplifier Technical Specifications Transmitters / Receivers / Amplifiers Transmitter Model 1500 Model 1520 Model 1550 Audio transmissio