Replaceable valve cartridge. One-half inch male NPSM shank with vandal-resistant mounting and brass escutcheon plate (use is optional). Operating range from 20 to 125 psi. Adjustable flow cycle from 7 to 40 seconds (factory preset at a minimum of 10 seconds). Vandal-resistant spray end with 1.5 gpm flow control maintains flow below 0.25 gallons per cycle. Push button activator requires less than 5 lbs. of force to operate. Available with mixing valve and built-in checks or without mixing valve f
Escutcheon plate (use is optional). □ 1340M.000X Vandal Resistant Metering Faucet with mixing valve. Built-in strainer and checks. Less escutcheon plate. □ 1340.000 Vandal Resistant Metering Faucet less mixing valve. Single supply for cold or tempered water. Escutcheon plate (use is optional). 48mm (1-7/8) 111mm (4-3/8) 38mm V- (1-1/2) 44mm (1-3/4) MAX 70mm (2-3/4) MIXING VALVE WITH BUILT-IN CHECKS AND STRAINER (ON APPLICABLE MODEL) 38mm (1-1/2) NOTE: Dimensions are shown for p
One-half inch male NPSM shank with vandal-resistant mounting and brass escutcheon plate (use is optional). Operating range from 20 to 125 psi. Adjustable flow cycle from 7 to 40 seconds (factory preset at a minimum of 10 seconds). Vandal-resistant spray end with 1.5 gpm flow control maintains flow below 0.25 gallons per cycle. Push button activator requires less than 5 lbs. of force to operate. Available with mixing valve and built-in checks or without mixing valve for use with cold or tempered
Cut along the dotted lines and place the corrugated protector over the top and front of the tub. The center cut-out drops into the center of the tub. After measuring the dimensions of the product, frame the construction area. Locate the tub in position and mark a joist so that a 2x4 stringer can be nailed in place. The stringer will be located under the flange against the wall. Nail in place the 2x4 support. Re-position the tub and check for level, both front to back and left to right. It ma
KIT) BOLT CAP COVER PLATE KIT L- EAT POST MTG. KIT ★ Replace XXX with I Fixture Color Code, I YYY with Trim Finish I REPLACEMENT BRASS ARM TRIP LEVER LEFT HAND ONLY 738899-0020A CHROME AVAILABLE IN THE 738899-0200A WHITE FOLLOWING COLORS: 738899-0990A POLISHED BRASS DESCRIPTION D> COMPONENT PKG QTY ★ Tank Cover 735069-400.XXX * Seat and Cover - Round Front 5347.015.XXX * Seat and Cover - Elongated 5349.019.XXX •k Seat Post Mtg. Kit 760030-100.XXX Seat Assembly Tool (Not Shown)
hes Chrome Oil Rubbed Bronze Polished Nickel Steel Optik Rubbed Bronze The measurements shown are for reference only. Products and specifications shown are subject to change without notice. Specification sheet revised 1/2009 14019001 14019621 14019831 14019861 14019921
10" Baseplate 14019XX1 Product Features • For concealing basin holes • Fits single-hole kitchen faucets • Includes mounting hardware • Fits all kitchen faucets Available Finishes Chrome Oil Rubbed Bronze Polished Nickel Steel Optik Rubbed Bronze The measurements shown are for reference only. Products and specifications shown are subject to change without notice. Specification sheet revised 1/2009 14019001 14019621 14019831 14019861
d Nickel Steel Optik Rubbed Bronze The measurements shown are for reference only. Products and specifications shown are subject to change without notice. Specification sheet revised 1/2009 14019001 14019621 14019831 14019861 14019921