Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  

Jonsered CS 2240

downloaded: 24File size: 3 mb    Manafacture: Jonsered  
Category: Chainsaws

6 Technical data...................................................... 10 Service tools ........................................................ 12 Service data ......................................................... 14 Safety equipment................................................. 16 Repair instructions.............................................. 24 Carburettor........................................................... 33 Troubleshooting...................................................

Jonsered FR2216 MA 4X4

downloaded: 1File size: 3 mb    Manafacture: Jonsered  
Category: Lawn Mowers

Jonsered CS 2245S

downloaded: 3File size: 3 mb    Manafacture: Jonsered  
Category: Chainsaws

• Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly. • Refuel and start the chain saw. See the instructions under the headings Fuel Handling and Starting and Stopping. • Do not use the chain saw until sufficient chain oil has reached the chain. See instructions under the heading Lubricating cutting equipment. WARNING! Never allow children to use or be in the vicinity of the machine. As the machine is equipped with a spring- loaded stop

Jonsered CS 2250S

downloaded: 4File size: 3 mb    Manafacture: Jonsered  
Category: Chainsaws

Never try to fell the tree that is trapped. Never work in the risk zone of the hanging trapped tree. The safest method is to use a winch. • Tractor-mounted • Portable Cutting trees and branches that are in tension Preparations: Work out which side is in tension and where the point of maximum tension is (i.e. where it would break if it was bent even more). Decide which is the safest way to release the tension and whether you are able to do it safely. In complicated situations the only safe method

Jonsered CS 2245

downloaded: 5File size: 3 mb    Manafacture: Jonsered  
Category: Chainsaws

KEY TO SYMBOLS 2 – English Symbols on the machine: WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor Both of the operator . s hands must be used to operate the chain saw. Never operate a chain saw holdi

Jonsered CS 2255

downloaded: 14File size: 2 mb    Manafacture: Jonsered  
Category: Chainsaws

If the chain lubrication system is still not working after carrying out the above checks and associated measures you should contact your servicing dealer. Chain drive sprocket The clutch drum is fitted with one of the following drive sprockets: A Spur sprocket (the chain sprocket is welded on the drum) B Rim sprocket (replaceable) Regularly check the degree of wear on the drive sprocket. Replace if wear is excessive. Replace the drive sprocket whenever you replace the chain. Needle bearing lubri

Jonsered CS 2188

downloaded: 0File size: 2 mb    Manafacture: Jonsered  
Category: Chainsaws

Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth • Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the chips will be very small. If the chain is very blunt it will produce wood powder and no chips or shavings. • A sharp chain eats its way through the wood and produces long, thick chips or shavings. 2 Cutting angle 3 File position 4 Round file diameter It is very difficult

Jonsered CS 2153

downloaded: 25File size: 2 mb    Manafacture: Jonsered  
Category: Chainsaws

This is best done with a wire brush. A blocked screen will cause the engine to overheat and may lead to serious damage. Note! The screen must be replaced if it is damaged. If the screen is blocked the machine will overheat and this will cause damage to the cylinder and piston. Never use a machine with a muffler that is in poor condition. Never use a muffler if the spark arrestor screen is missing or defective. The muffler is designed to reduce the noise level and to direct the exhaust gases away

Jonsered CS 2153 EPA I

downloaded: 1File size: 2 mb    Manafacture: Jonsered  
Category: Chainsaws

Empty the fuel tank and clean the inside. Sharpen the chain and check its tension and condition. Check the drive sprocket for excessive wear and replace if necessary. Clean the carburetor compartment. Empty the oil tank and clean the inside. Clean the starter units air intake. Clean the air filter. Replace if necessary. Check all cables and connections. Check that nuts and screws are tight. Check that the stop switch works correctly. Check that there are no fuel leaks from the engine, tank or fu

Jonsered CS 2152 EPA III

downloaded: 2File size: 2 mb    Manafacture: Jonsered  
Category: Chainsaws

• An incorrect fuel mixture (too much or incorrect type of oil). • A dirty air filter. These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about





Category