7. Use the clamp assembly (10) to secure the workpiece wherever possible. 8. It is possible to remove the clamp assembly (10) by loosening the clamp assembly lock (11) and moving it to the other side of the table. Make sure the clamp assembly lock is tight before using the clamp (Fig. r). 9. Before turning on the saw, perform a dry run of the cutting operation to check that there are no problems. 10. Hold the operating handle (7) firmly and squeeze the switch trigger (24). Allow the blade to rea

These instructions contain information necessary for safe and effective operation of this product. This product has unique features. Even if you are familiar with similar products, please read this manual carefully to make sure you get the full benefit from them. Keep this manual close to hand and ensure all users of this tool have read and fully understand them. Guarantee To register your guarantee visit our web site at and enter your details*. Your details will be included on our mailing list

We recommend that you always wear a dust mask when operating this saw. • Wear gloves when handling saw blades and rough materials. • Saw blades shall be carried in a holder wherever possible. • Select saw blades in relation to the material being cut. • Use correctly sharpened saw blades and observe the maximum speed marked on the blade. • Take additional care when trenching (slotting). • The mitre saw can be safely carried by the carrying handle but only once it has been removed from the mains p

2. Set the on/off switch (18) to On (the I position). Make sure the brake is ON when starting for safety, by pushing the front guard forward. 3. When the machine is cold first pull out the choke control (18) to the CHOKE position. (Fully withdrawn). Note. Once the choke control has been pulled out, it cannot be pushed back to the run position. 4. Depress the priming bulb (29) 6 times or when the bulb is full of fuel. Note. This is not required if engine is warm or is being restarted. It returns

• Damage to hearing if effective ear protectors are not worn. Wear goggles Wear ear muffs Wear a breathing mask Contents of carton • 1/2” Impact wrench • Kitbox • Instruction manual Assembly The GMC impact wrench is packed, fully assembled except for the impact socket. Please select the required impact socket and insert correctly (refer to the socket change section of this manual). Know your product 1. Drive Shank 2. Trigger Switch 3. Replaceable Brushes 4. Handle/Grip 5. Power Cord 3 1 2 4 5 Un

A 4. Turn the table over and set it on its legs. Attaching the switch box 1. The switch box assemblbehind the lof the table. 2. Once the switch box is installed the on/off swibe positioned on the riside of the left leg. 3. An electric cord and an eoutlet for the router are located at the rear of the switch box (fig. C). 4 Place the switch box behind the left leg. 5. Align the screw holes on the top of the switch box with the 2 holes at the top of the left leg. y fits eft leg near the top tch wil

When the 9 battery indicator is showing only 1 LED (low) the battery should be removed and put on the charger. LED Work area light The drill has 3 LED lights (11) to illuminate the work area and improve vision when drilling in areas with insufficient light. To turn the LED lights on and off depress the LED light switch (13). Using the drill Use the forward/reverse switch (4) to select the direction of rotation, then pull the trigger (3). This trigger switch is an electronic variable speed contro

1200W VARIABLE SPEED SCROLL SAW WITH REDEYE ® LS1620 INSTRUCTION MANUAL BlackCyanMagentaYellowCode: LS1620Date: 060906Edition: 05Op: BRBlackCyanMagentaYellowCode: LS1620Date: 060906Edition: 05Op: BR ContentsContents Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 3 Safety rules for laser lights 4 General safety instructions 4 Additional safety rules for scroll saws 5 Accessories 6 Unpacking 6 Assembly 6 Know your product 7 Mounting the saw to a workbench 8 Blade