.. relative gain adjustments. Argument details Name Description Units Device 0–7 or * to select all units MAX Command form Channel See Groups and Channels, page 97 Group I,O,M,P,L Value -65.00 to 20.00 dB Null to return the current setting Example: #51 MAX 2 M 10 On XAP 800 unit 1 (#51), the maximum (MAX) relative gain setting for mic (M) channel 2 is 10dB. Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands MDMODE - Modem Mode This command e

Channel Label rename the channel by entering a name in the Label entry field (optional). labels are shown throughout Console wherever the channel is referenced. Channel Configuration Buttons the Channel Configuration Buttons enable you to configure settings for the telco rx channel. With the exception 108 of the mute, Cleareffect, and alC buttons, which toggle their respective functions and have no user-configurable settings, clicking a channel configuration button displays the Channel property

800-151-880 (REVISION 3.2) April 2009 © 2009 Clearone Communications, Inc. all rights reserved. Information in this document is subject to change without notice. other product names may be registered trademarks of their respective owners who do not necessarily endorse Clearone or Clearone’s products in the united states and/or other countries. Clearone Document: 800-151-880 revision 3.2 april 2009. Adobe® Flash® Copyright and Trademark Notice adobe® Flash® player. Copyright © 1996 –2009 adobe sy

Command Form: DEVICE AAmB [value] Argument Type Channel Channel group group value unsigned Integer Size 1 1 2 Values see Groups and Channels 3 (m) 0 = off 1 = on 2 = toggle (null to query in text) units AARINGS – Number of Rings to Auto Answer On this command selects/reports the setting of the number of rings to auto answer. Command Form: DEVICE AARINGS [value] Argument Type Channel Channel group group value unsigned Integer Size 1 1 2 Values see Groups and Channels 17 (r) 2

No part of this document may be reproduced in any form or by any means without written permission from ClearOne Communications, Inc. Printed in the United States of America. ClearOne Communications, Inc. reserves specific privileges. Information in this document is subject to change without notice. PSR1212 Installation and Operation Manual ClearOne Part No. 800-155001 Jan 2007(Rev. 7.1) Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 PSR1212 Installation and Operation Manual iii

No part of this document may be reproduced in any form or by any means without written permission from ClearOne Communications, Inc. Printed in the United States of America. ClearOne Communications, Inc. reserves specific privileges. Information in this document is subject to change without notice. AP400 Installation and Operation Manual ClearOne Part No. 800-150-001 July 2002 (Rev. 5.0) Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 AP400 Installation and Operation Manual iii

The diagram below illustrates the typical connections that are made for a single-unit XAP 800 system. The default routing settings in the G-Ware Matrix Screen allow the XAP 800 to work out of the box for this type of installation. CHAPTER 2: Installation Hardware Setup Figure 2.1. XAP 800 installation diagram 1100 Installation ~ Hardware Setup Figure 2.2. XAP 800 rear-panel connectors To connect the unit 1. Place the unit in a standard 19-inch rack and attach it securely. 2. If you are using a c

. . . . . . . . . . . . . . . . The RAV 600/900 . . . . . . . . . . . . . . . . . . . . . . . Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Basic Room Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting the RAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Open a web browser and enter the IP address or Network Name of the RAV in the address bar. 2. Enter your User Name and Password.The default user name is ClearOne and the default password is RAV. Figure 5.1. Network Password The RAV web interface opens. Navigation buttons are shown in the left channel. Figure 5.3. Dialer window To make a call 1. Click the ON/OFF button to take the phone off-hook. 2. Using the number pad, dial a phone number just as you would on a standard phone. Note: You can als

Figure 3.22. Line input device list 2. Click the plus sign ( +) to expand the category that matches your device type. 3. Click the device name and drag it to the Configuration screen. Drop over the Line Input or Output. The label and icon will change based on the selected device. Note: Video codecs will cover both Line Input and Output. A sound card should be placed on Line Input or on both Input and Output for web conferencing. An amplifier is Output only. Technical Services Group ~ 1-800-283-5