traditional fire extinguishers allows more time to fight the fire. • Faster suppression of fires may help reduce loss of life and property damage for multi-family facility managers and owners. • Easy clean-up, biodegradable. Won’t damage stove and counter surfaces like a traditional ABC fire extinguisher. Reduces maintenance and cleanup costs. • Augments 2.5lb fire extinguisher compliance unit required in some areas for multi-family dwellings. • No Hazmat Shipping Fee Tundra is effective on

To determine which Smoke/CO Alarm initiated an alarm, refer to the table. During an Alarm: On Initiating Alarm(s) – Red LED(s) flashes (flash) rapidly On All Other Alarms – Red LED is Off After an Alarm (Latching): On Initiating Alarm(s) – Green LED(s) On, Red LED(s) flash once every 5 seconds On All Other Alarms – Green LED(s) On, Red LED(s) is Off Compatible Interconnected Units Interconnect units within a single family residence only. Otherwise all households will experience unwanted alarms w

See “How To Install This Smoke/CO Alarm” for details. Do not connect it to any other type of alarm or auxiliary device. Connecting anything else to this unit may damage it or prevent it from operating properly. • The battery compartment resists closing unless a battery is installed. This warns you the unit will not operate under DC power without a battery. • Do not stand too close to the unit when the alarm is sounding. It is loud to wake you in an emergency. Exposure to the horn at close range

Use the Silence Feature to silence the Alarm. This will silence the alarm, and once the smoke clears the unit will reset itself automatically. WHAT TO DO IN CASE OF FIRE • Don’t panic; stay calm. Follow your family escape plan. • Get out of the house as quickly as possible. Don’t stop to get dressed or collect anything. • Feel doors with the back of your hand before opening them. If a door is cool, open it slowly. Don’t open a hot door. Keep doors and windows closed, unless you must escape throu

Additional Smoke/CO Alarms may be required depending on the length, angle, etc. of the ceiling's slope. Refer to NFPA 72 for details on requirements for sloped or peaked ceilings. Continued... SUGGESTED AREAS FOR INSTALLING SMOKE ALARMS, CO ALARMS, AND COMBO UNITS SMOKE ALARM WITH SILENCE FEATURE CO ALARMS BOTH, OR COMBINATION SMOKE/CO ALARMS SMOKE ALARMS KEY: Suggested locations are based on NFPA recommendations (NFPA 72 for Smoke Alarms and NFPA 720 for Carbon Monoxide Alarms). Always refer to

You have purchased a state-of-the-art Smoke & CO Alarm designed to provide you with early warning of a fire or Carbon Monoxide. Key features include: Smoke & Carbon Monoxide Combination Alarm. One alarm protects against two deadly household threats. Intelligent Sensing Technology designed to help reduce unwanted or nuisance alarms. Smart Interconnect can be interconnected to BRK Smoke Alarms. One interconnect wire carries both smoke and CO alarm signals. Single Button Test/Silence eliminates con

These Smoke/CO Alarms have two separate locking features: one locks the battery compartment, and the other locks the Smoke/CO Alarm to the mounting bracket. You can choose to use either feature independently, or use them both. Tools you will need: • Needle-nose pliers or utility knife • Standard/Flathead screwdriver. USING THE OPTIONAL LOCKING FEATURES THE BATTERY COMPARTMENT LOCK TO LOCK THE BATTERY COMPARTMENT: Do not lock the battery compartment until you have activated the battery and tested

Gently pry back the tab and pull the connector free. 1 2 3 5 6 4 2 3 9 7 8 The Parts of This Unit 1 Mounting Bracket 2 Mounting Slots 3 Locking Pins (break out of bracket) 4 Hot (Black) AC Wire 5 Neutral (White) AC Wire 6 Interconnect (Orange) Wire 7 Latch to Open Battery Compartment 8 Swing-Out Battery Compartment 9 Quick-Connect Power Connector The basic installation of this Smoke Alarm is similar whether you want to install one Smoke Alarm, or interconnect more than one Smoke Alarm. If you ar

UNDERSTANDING THE INDICATOR LIGHTS AND Unwanted alarms can occur if a Smoke Alarm is placed directly next to a fuel-burning HOW TO INSTALL THIS SMOKE ALARM WHAT TO DO IN CASE OF FIRE ALARM HORN PATTERNS source. Ventilate these areas as much as possible. This Smoke Alarm is designed to be mounted on any standard wiring junction box to a 4-inch (10 cm) size, on either the ceiling or wall. Read “Recommended Locations For Smoke Alarms” and Condition • Don’t panic; stay calm. Follow your family escap

If you are installing this Alarm for use by others, you must leave this manual—or a copy of it—with the end user. COMBINATION CARBON MONOXIDE & SMOKE ALARM WITH VOICE & LOCATION AND REMOTE CONTROL TEST/SILENCE Features: • Separate sensors to detect smoke and CO; the two alarm systems work independently • Voice with programmable location • Separate audible and visual signals to indicate alarm levels of smoke or CO • Remote infrared Test/Silence and programming • Powered by two “AA” batteries • Si