KN.1GB0H.015 MEMORY SAMSUNG DDR3 1333MHZ 1G UNB-UFFERED DIMM W/O ECC F DIE (46NM) DIMM 1G M378B2873FHS-CH9 KN.1GB0B.036 MEMORY A-DATA DDR3 1333MHZ 1G UNB-DIMM W/O ECC W/ELPIDA CHIP DIMM 1G AD63I1A0816EZ DDR3 UNB. KN.1GB0C.008 MEMORY TRANSCEND DDR3 1333MHZ 1G UNB-DIMM W/O ECC W/PSC CHIP DIMM 1G JM1333KLU-1G DDR3 1333MHZ UNB. KN.1GB0F.005 MEMORY UNIFOSA DDR3 1333MHZ 2G UNB-DIMM GU512303EP0202 LF 128*8 0.065UM DIMM 2G GU512303EP0202 UNB. KN.2GB0H.009 MEMORY SAMSUNG DDR3 1333MHZ 2G UNB-UFFERED DIMM

The hours are displayed with 24-hour format. Format: HH:MM:SS (hour:minute:second) System Time System Date Sets the system date. Format MM/DD/YYYY (month/day/ year) System Date System Memory This field reports the memory size of the system. Memory size is fixed to 640MB Total Memory This field reports the total memory size of the system. For Aspire 8530 Series only. Extended Memory This field reports the memory size of the extended memory in the system. Extended Memory size=Total memory size-1MB

2. See “Removing the Lower Cover” on page 56. 3. Remove the one screw (B) securing the hard disk drive module. Step Size (Quantity) Color Torque 1 M2 x L4 (1) Silver 1.6 kgf-cm 64 Chapter 3 4. Slide the hard disk drive module away from the connector. 5. Lift the hard disk drive module and remove it from the hard disk drive bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. Chapter 3 65 6. Remove the four screws (D) securing the hard disk to t

Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. NOTE: If the system fails after you make changes in the BIOS Setup Utility menus, reset the computer, enter Setup and install Setup defaults or correct the error. 124 Chapter 4 Index of Error Messages Error Code List Error Codes Error Messages 006 Equipment Configuration Error Causes: 1. CPU BIOS Update Code Mismatch

2. Disconnect the HDD cable. 3. Remove the two (2) screws. Step Size Quantity Screw Type HDD M2.5*4 2 55 Chapter 3 4. Slide the HDD towards the speakers to release it from the flanges. 5. Lift the HDD out of the chassis. 6. Remove the four (4) screws from the HDD bracket (both sides). Step Size Quantity Screw Type HD Bracket M3*4 4 Chapter 3 56 7. Remove the brackets from the HDD. 57 Chapter 3 Removing the Power Supply 1. See “Removing the Hinge” on page 50 2. Remove two (2) screws securing the

7C Generate and write contents of ESCD in NVRam. 84 Log errors encountered during POST. 85 Display errors to the user and gets the user response for error. 87 Execute BIOS setup if needed / requested. Check boot password if installed. 8C Late POST initialization of chipset registers. 8D Build ACPI tables (if ACPI is supported) 8E Program the peripheral parameters. Enable/Disable NMI as selected 90 Initialization of system management interrupt by invoking all handlers. Please note this checkpoint

All of its system functions are tested under Windows® 7 environment. Refer to the following lists for components, adapter cards, and peripherals which have passed these tests. Regarding configuration, combination and test procedures, please refer to the Compatibility Test Report released by the Acer Mobile System Testing Department. BRAND Type Description 3G EM770W-Rev1 EM770W-Rev1 Ericsson F3307-900MHz Ericsson F3307-900MHz A cover Aluminum Aluminum Adapter Chicony Power 65W Adapter Chicony Pow

Disconnect the Aux-In cable. 50 Chapter 3 2. Disconnect the CD-In cable. 3. Disconnect the floppy cable. 4. Disconnect the IDE1 and IDE2 cable. Removing the Modem card, CD-ROM, Floppy and HDD NOTE: There have the hook lock on CD-ROM, floppy and HDD cage, in other words, please move a little bit forward to release the lock then you can disassemble these parts smoothly. 1. Detach the modem card. 2. Disconnect the CD-ROM power, IDE and CD-In cables. 3. Disconnect the floppy cable and power cable. 4

IDEO : Hitachi HTS545032B9A300 2. IDE1 : HL-DT-STDVDRAM GT32N3. USB FDD : 4. Network Boot : MBA v12.2.0 Slot 05005. USB HDD : 6. USB CDROM: Boot priority order: 1. IDEO : Hitachi HTS545032B9A300 2. IDE1 : HL-DT-STDVDRAM GT32N 3. USB FDD : 4. Network Boot : MBA v12.2.0 Slot 0500 5. USB HDD : 6. USB CDROM: F5/F6 InsydeH20 Setup Utility Rev. 3.5 Information Main Boot ExitSecurity Chapter 2 33 Exit The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility. Item S p