4. On the Advance System Settings window select “OK” and select Hardware tab on System Properties. Select on “Windows Update Driver Settings.” 5. Then Windows Update Driver Settings will show select“Ask Me Each Time I connect a new Device” and press “OK”. 6. Close the Control Panel after completing steps 1 to 5. 7. After completing the post installation procedure you can insert the DVD Xpress DX2 CD to your CD-ROM drive 8. Browse the CD content by clicking Start then Computer5 2. A screen of “Fo
Connect your ADSL line to this port. 2 Power Inlet Connect the included power adapter to this inlet. Warning: Using the wrong type of power adapter may damage the ADSL Wireless Base Station. 3 Reset Button Use this button to reset the power and restore the default factory settings. To reset without losing configuration settings, see ‘Reset’ on page 28-29. 4 On/off Button to switch unit on/off. 5 LAN Ports 10/100 Ethernet ports (RJ-45). Connect devices on your local area network to thes
Date/ Time SettingYou can change time setting from this page. Clicks “Apply” to save the setting. By default SNTP is set to Network Time Service otherwise select synchronize to PC. If internet access is available, we recommended setting SNTP to Network Time Service instead. IP Configuration By default, “IP Config” is set to “Automatic IP”. This will allow the NAS adapter to obtain its IP address automatically. If you prefer setting it manually, select the static IP option, enter your own value a
Wire It Up!11 3. Plug It In12 4. Install Device Drivers and Software12 5. Install Software Applications12 6. Verify Hardware Installation13 7. Optimize System for Best Performance13 8. Installation Summary14 9. Start Making DVD Movies14 USB Instant DVD Capture Wizard 14 Using Capture Wizard Video Capture/Playback tool for the first time:16 Capture Wizard Feature and Functions19 Menu Options20 Menu Options: Video Inputs/Outputs20 Menu Options: Video Format 20 Menu Options: Brightness/Color22 Menu
THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT. CAUTION: TO PREVENT ELECTRICAL SHOCK, THIS EQUIPMENT REQUIRES A GROUNDING CONDUCTOR IN THE LINE CORD. THE LINE CORD PROVIDED WITH THE EQUIPMENT IS ACCEPTABLE FOR USE WITH NEMA STYLE 5-15R AC RECEPTACLE SUPPLYING NOMINAL 120 VOLTS. DO NOT CONNECT THE PLUG INTO AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY INSERTED WITH NO PART OF THE BLADES EX
.. . . .. . . .. . . .. . . .. 4 Installation Guide . . . . . . . . . . . . . . . 8 Step 1. Driver Installation . . . . . . . . . . . . . . . 10 Step 2. Plugging In the Hardware . . . . . . . . 12 Software Installation . . . . . . . . . . . . . . . . . 14 Ulead VideoStudio 8 . . . . . . . . . . . . . . . . . 15 French Manual . . . . . . . . . . . . . . . . . 31 Help Resources . . . . . . . . . . . . 58 Service and Warranty . . . . . . . . . . . . . . . 59 FCCInformation . . . . . . . . . . . . .
All rights reserved. No part of this documentation or software may be reproduced or distributed in any form without prior written permission from ARESCOM, Inc. ARESCOM, Inc. has the right to make revisions and to change the contents of this document without any obligation to provide prior notice of such revisions and changes. ARESCOM, Inc. provides this documentation without any kind of warranty, either expressed or implied, including but not limited to the implied warranties of merchantability
The Compact Flash should be keyed to prevent the card from being incorrectly inserted. 2. Put the mechanism in the open position and slide the flat ribbon cable into the ZIF connector on the adapter. 3. Close the latch to secure the ribbon cable connection. 1.8” ZIF- CF adapter shown below attached to a 1.8” ZIF to 2.5” IDE converter 1.8” ZIF- CF adapter shown below connected to a 2.5” drive enclosure TECHNICAL SUPPORT Email: Internet: Technical Support (8:30 am to 6:00 pm PST) Phone: 4
Insert Host Controller Driver Disk into CDROM. b. The Addonics Technologies Driver Disk window pops up. c. Select Configuration Utilities. Sil5744 SteelVine Manager. To extract the utility select your operating system from the list. d. Extract the files into your system. e. Install SiI5744 Manager by clicking the 5700Package.msi. Follow the instructions. f. After software installation, run the SteelVine Manager. The 57xx SteelVine Manager Utility manual can found in the Driver Disk under User Gu
Clare, Ireland Phone: +353.61.702042 Fax: +353.61.702001 Southern Europe and MEA Office 51-55 me Hoche 94200 Ivrysur Seine, France Phone:+331.43.90.19.20 Fax:+33 1.46.58.67.06 Installation Guide O System Requirements Requirements: • IBM Compatible PC or MAC* with available USB 1.1 or USB 2.0 port •Available FireWire port • USB 2.0 Host controller requires USB drivers from Microsoft (WinXP) or third party drivers shipped with USB Host controller card. NOTE: • For FULL USB 2.0 bandwidth