The default termination setting for a channel is Automatic. This setting allows the SCSI card to adjust SCSI termination automatically, depending on which connectors have SCSI devices attached to them. Regardless of the SCSISelect termination setting, the SCSI card termination is always disabled when the power is turned off. If you want SCSI card termination to be enabled when the power is turned off, you must terminate the SCSI channel manually. To manually terminate the channel on the Adaptec

See Turning the Power Off on page 2-7. 2 Remove the SAF-TE disk I/O card installed in the enclosure. See Replacing an I/O Card on page 5-21 for detailed instructions. DuraStor 412R/6320SS/7320SS Installation and User’s Guide DuraStor 412R/6320SS/7320SS Installation and User’s Guide 2-8 through 2-10. Some configurations have multiple switch setting options available. Choose the setting that is appropriate for your system. There is one switch setting for single-bus mode and two possible settings f

Nella finestra principale del progetto di MyDVD viene illustrato come verra visualizzato il menu VCD nel televisore. Per rinominare il file, e possibile fare clic sul titolo del filmato e digitare un altro titolo. Italiano 8 Tagliare i filmati Tagliare i filmati 1 Nella finestra principale del progetto fare doppio clic sul pulsante della miniatura del filmato che si desidera tagliare. 2 Utilizzare i controlli della finestra di taglio per effettuare l'operazione. Trascinare la parentesi verde per

In theory, any SCSI device can be plugged into any SCSI controller. spare A disk drive that you designate as a replacement disk drive as part of the spare pool. If a disk drive in a redundant array fails, the controller looks for a spare disk drive on which to rebuild the data of the failed disk drive. spare pool One or more disk drives that you designate as replacements for any arrays on a controller. stand-alone Stand-alone configuration refers to a storage system in which the controller opera

Resetting the Controller This section explains how to reset (or Mode 0 flash) your Adaptec RAID controller. You may want to do this if the controller becomes inoperable, or if a firmware upgrade is unsuccessful. To reset your Adaptec RAID controller: 1 Download the firmware version currently installed on your controller from 2 Extract the downloaded files to a folder on your local hard drive (for example, C:\Download\Drivers). 3 Create a bootable MS–DOS floppy disk and copy the AFU.exe file to i