■ 0 This professional-style waffle maker features a rotating design that bakes extra thick Belgian waffles in minutes. Q It flips 180° to evenly spread batter for waffles that are crispy outside and tender inside. 0 Deep grid makes an extra thick, 7-inch diameter waffle with four easy-to-cut sections. 0 Countdown timer with LED digital display signals when baking time is up. 0 Nonstick interior easily wipes clean. The brushed stainless steel exterior assures lasting beauty. Dual function

• Always remove the plug from the socket when the appliance is not in use and each time before it is cleaned. • Danger! Nominal voltage is still present in the appliance as long as the appliance is connected to the mains socket. • Switch the appliance off before disconnecting from the mains. • Never use the cord to carry the appliance. 7 8 GB GBGB SPECIAL SAFETY INSTRUCTIONS • Burn hazard! The iron base is escapes while steam • Make sure to unplug • Turn off and unplug the appliance • After usin

Let dry. 4. To clean the outside of the unit, wipe with a damp cloth. Do not use abrasive cleansers on the unit. Do not place unit in automatic dishwasher or immerse unit in water or other liquid. 5. The unit may be stored in an upright position. Store removable grids so that nonstick surfaces are not scratched. DO NOT IMMERSE UNIT IN WATER OR OTHER LIQUID. Waffle Baker Recipes Waffle Baker Tips! • The waffle baker grids hold about 3.4 cup batter and make two 4-inch square waffles. Two waffles w

3 1 2 4 6 8 3 10 9 5 7 840084900 Ev01 5/24/01 1:44 PM Page 4 Using Your Iron To Dry Iron 1. Plug iron into electrical outlet. The Auto Shutoff Reset Button/Light will come on. If the plug will not fit, read about the polarized plug in “Consumer Safety Information.” 2. Turn the Temperature/Steam Dial to a setting in the Dry Iron range, settings 1-3. As an example, the illustration shows the iron set at 2 (Nylon). NOTE: To dry iron at setting 4 and higher, empty all water from the iron. 3. Preheat

16. Make sure that neither the cord nor yourself touch any hot part of the appliance due to danger of burning. 17. Place the appliance only on a dry, level surface. 18. Never remove the waffle or sandwich with any kind of cutting device or other metallic kitchen utensil. 19. Always allow the appliance to cool down completely before putting it away and never wind the cord around the appliance while it is still hot. 20. To reduce the risk of fire or shock hazard, do not operate unit unless grids a

If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the polarized plug by modifying the plug in any way. Use the iron on an ironing board. Ironing on any other surface may damage that surface. Do not operate the iron with the Quick Storage Shield attached. 840077000 Ev03 11/9/00 10:26AM Page 3 Before First Use • Steam vents should be cleaned before first use. Prepare iron for steam ironing, the

Plug iron into outlet. 3. Turn Temperature Control Dial to desired to O (the Dry 2. Set the Adjustable Steam Switch temperature. Iron position). Allow two minutes for iron to reach desired temperature. 4. To turn iron Off, turn Temperature Control Dial to Off and unplug iron. To Steam Iron 1. Unplug iron. Using a cup, slowly Opening pour 6 ounces (3.4 cup) of tap water into water tank opening. Do not fill iron directly from the faucet. 2. Plug iron into outlet. 3. Turn the Temperature Control Di

Ironing on feature intended to help reduce the risk of any other surface may damage that surface. electrical shock. If you are unable to insert the plug into the outlet, try reversing the Before First Use • Steam vents should be cleaned before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam. This will clean the vents. • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becom

This will damage the finish. 2. Run the iron over an all-cotton cloth to remove any residue. USING THE SELF-CLEANING FEATURE You should use the Self-Cleaning feature once a month to maintain the optimal performance of your iron. Turn off iron following instructions above. To use the Self-Clean feature: 1. Move the Variable Steam Lever back and forth from (Dry) to (Max Steam) several times to remove debris and minerals from the Variable Steam Valve. This keeps water flowing into the steam chamber

WARNING: The Auto-Off is a safety feature and is not a recommended means for turning your iron off. See “Caring for Your Iron After Use.” MOTION SMART® AUTO-OFF FEATURE (select models only) When the iron is plugged in, the Power Indicator will light steadily, indicating that there is power to the iron. IF YOU LEAVE THE IRON: • in a horizontal position without moving it, or accidentally tip the iron over, it will automatically stop heating after 30 seconds. The Power Indicator will blink to let y