Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
HP StorageWorks 4400
Scalable NAS for Windows File
HP technical support
Serving quick start guide
For worldwide technical support information, see the HP support
website: ht p://www.hp.com/support
Before contacting HP, collect the following information:
• Product model names and numbers
• Technical support registration number (if applicable)
• Product serial numbers
• Error messages
• Operating system type and revision level
• Detailed questions
System components
The system is shipped with provisioned storage and a configured cluster
that includes three filesystems. System components include:
• EVA4400 dual controller
• 4.8 TB to 38.4 TB of Fibre Channel storage; 4.8 TB to 88.4 TB of
Fibre Channel and FATA storage
• Three DL380 nodes, each with 12GB RAM
• DL320 Command View server
• Dual Fibre Channel switches
• Network switch
• Keyboard, Video, Mouse (KVM) switch
• Command View EVA
• Business Copy EVA for snapshots
• Microsoft Windows Storage Server 2003 (64-bit mode)
• HP Clustered File System and Volume Manager software
© Copyright 2008 Hewlett-Packard Development Company, L.P.
System setup
First edition: September 2008
The following system setup is included in the Installation and Setup
The information in this document is subject to change without
Service provided with your purchase:
notice.
1. Inspect the shipping crate for damage, unpack the system, and
Printed in the US
install it in the proper location.
2. Power up the power distribution unit (PDU).
www.hp.com
3. Configure the Command View server. Set up the server, instal
Command View and the appropriate licenses, and verify network
connections.
4. Verify factory settings. Power up the cluster servers, start the cluster
software, and verify that the cluster filesystems are visible on all
nodes.
5. Configure the customer network interface on the cluster servers and
verify that the cluster network is visible.
6. Instal the iLO license on each server.
7. Start HP Clustered File System on each cluster server.
8. Start the HP CFS Management Console and discourage
administrative traffic from using the customer network interface.
9. Set passwords for the switches, CV server, and cluster servers. Also
change the CV server password in the HP Clustered File System
snapshot configuration.
10. Test the cluster, verifying that all servers can see files on the
filesystems and can perform read and write operations.
11. Configure Virtual CIFS Servers or Cluster File Shares.
AN59596001
Page 1
...Other models in this manual:
Media Storage - HP DL380-SL Clustered Gateway (59.98 kb)
Media Storage - HP ProLiant DL380G5-WSS Storage Server Clustered Gateway (59.98 kb)
Media Storage - HP ProLiant DL380G5-WSS Storage Server Initial Cluster (59.98 kb)
Media Storage - HP 3PAR StoreServ File Controller v2 Storage (59.98 kb)