Votes - 3, Average rating: 3.7 ( )

Manafacture: Sony File size: 3.21 mb File name: Language of manual:

1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “Wireless Set-up”. 3 Select “Scan”, then select a network from the list of scanned wireless networks. 4 Follow the instructions on the set-up screen. ~ • If you use WPS for network set-up, the security settings of the wireless LAN router activate, and any equipment previously connected to the wireless LAN in a non-secure status will be disconnected from the network. In this case, activate the security settings of the disconnected equipment and then reconnect. Or, you can deactivate the security settings of the wireless LAN router, and then connect the equipment to a TV in a non-secure status. (Continued) 23 GB Network Type 3: Unsecured network with any type of wireless LAN router Type 3: Unsecured network with any type of wireless LAN router 1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “Wireless Set-up”. 3 Select “Scan”, then select a network from the list of scanned wireless networks. 4 Follow the instructions on the set-up screen. ~ • Security key (WEP or WPA key) will not be required because you do not need to select any security method in this procedure. Type 4: Wired network set-up Enter the respective alphanumeric values for your router if necessary. The items that need to be set (e.g. IP Address, Subnet Mask, DHCP) may differ depending on the Internet service provider or router. For details, refer to the instruction manuals provided by your Internet service provider, or those supplied with the router. 1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “Wired Set-up”. 3 Select “Auto” to set the IP Address and proxy server automatically, or “Custom” to set them manually. 4 Follow the instructions on the set-up screen. Viewing the network status You can confirm your network status. 1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “View Network Status”. If you cannot connect to the Internet Use the diagnosis to check possible causes for network connection failures, and settings. 1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “View Network Status”. 3 Select “Check Connection”. This may take a several minutes. You cannot cancel the diagnosis after selecting “Check Connection”. Adjusting the server display settings You can select home network servers to be displayed on the Home Menu. Up to 10 servers can be displayed in the Home Menu automatically. 1 Press HOME, then select > “Network” > “Home Network Setup”. 2 Select “Server Display Settings”. 3 Select the server you want to display on the Home Menu, and adjust the settings. If you cannot connect to your home network The TV detects if the server is being correctly recognised when you cannot connect it to your home network. If the diagnostic results indicate a failure, check possible causes, and network connections and settings. 1 Press HOME, then select > “Network” > “Home Network Setup”. 2 Select “Server Diagnostics”. The server diagnostic starts. When t...

Download now

Please, enter two numbers from picture: