Votes - 2, Average rating: 3.5 ( )

Manafacture: Sony File size: 3.21 mb File name: Language of manual:

Photos and specs  Sony  KDL-32EX729

Inserting batteries into the remote B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x 1 Remove the protection sheet. 2 Push and slide the cover upward. B For KDL-46/40/37/32EX52x, KDL-46/40/ 32CX52x, KDL-32EX42x, KDL-26/24/ 22EX32x 1 Remove the protection sheet. 2 Push and lift the cover to open. 8 GB 1: 1: 1 Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models. 2 Place the TV set on the Table-Top Stand. B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-46/40/32CX52x, KDL-32EX42x Guide pins ~ • Align the TV from the top, slide it in until the guide pins cannot be seen. BFor KDL-26/24/22EX32x 3 Fix the TV to the Table-Top Stand according to the arrow marks that guide the screw holes using the supplied screws. B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-46/40/32CX52x, KDL-32EX42x B For KDL-26/24/22EX32x ~ • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. ~ • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. • Be sure the TV is on the vertical position before switching on. TV set must not powered on with LCD panel face down to avoid uneven picture uniformity. B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-46/40/32CX52x, KDL-32EX42x Getting Started Soft cloth (Continued) 9 GB B B Soft cloth 2: Adjusting the viewing angle of the TV This TV can be adjusted within the angles as illustrated. Angle adjustment (Swivel) (except KDL-26/24/22EX32x) ~ • When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over. 20° 20° 20° 20° Angle adjustment (Tilt) (except KDL-46/40/32CX52x) ~ • Be careful not to pinch your fingers between the TV and stand when adjusting the angle. B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-32EX42x 0° -6° B For KDL-26/24/22EX32x 0° - 6° 10 GB ~ ~ Ensure that there are no objects in front of the TV. IR Sensor 3D Sync Transmitter (KDL-55/46/40/37/32EX72x, KDL-46/40HX72x only) Presence Sensor • Do not expose the Presence Sensor to direct sunlight or other strong light, as malfunction may occur. 3: Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder) Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART Getting Started Set Top Box/recorder (e.g. DVD recorder) ~ • Right Angle Type Universal SCART Lead is recommended for this connection. • Screw the satellite connector softly with hand, do not use any tool. • TV must be switched off when connecting satellite antenna (aerial). (Continued) 11 GB Co...

Download now

Please, enter two numbers from picture: