Votes - 2, Average rating: 4 ( )

Manafacture: Sony File size: 3.21 mb File name: Language of manual:

When the 1 (standby) indicator is not flashing, check the items in the tables as follows. Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by qualified service personnel. Condition Explanation/Solution There is no picture (screen • Check the antenna (aerial)/cable connection. is dark) and no sound. • Connect the TV to the AC power (mains), and press 1 on the TV. • If the 1 (standby) indicator lights up in red, press "/1. Tiny black points and/or • The screen is composed of pixels. Tiny black points and/or bright bright points appear on the points (pixels) on the screen do not indicate a malfunction. screen. Some programmes cannot • Check the antenna (aerial) or dish. be tuned. • The satellite cable might be short-circuited or there might be connection problems of the cable. Check the cable and connection and then turn the TV off with the Mains power On / Off switch, and turn it on again. • The frequency you entered is out of range. Consult the received satellite broadcasting company. The TV turns off • Check if the “Sleep Timer” is activated, or confirm the automatically (the TV “Duration” setting of “On Timer”. • Check if the “Idle TV Standby” is activated. enters standby mode). • Check if the “Presence Sensor” is activated. When no viewer is detected in front of the TV for a preset time, the picture automatically turns off, while leaving only the TV sound on. Additionally, after 30 minutes in picture off mode, the TV will switch to standby mode. The remote does not • Replace the batteries. function. • Your TV may be in SYNC mode. Press SYNC MENU, select “TV Control” and then select “Home (Menu)” or “Options” to control the TV. The “Parental Lock” • Enter 9999 for the PIN code. (PIN code 9999 is always accepted.) password has been forgotten. The TV surrounds become • When the TV is used for an extended period, the TV surrounds warm. become warm. You may feel hot when touching there by the hand. Additional Information 25 GB Specifications Specifications Panel system LCD (Liquid Crystal Display) Panel TV system Analogue: Depending on your country/area selection: B/G/H, D/K, L, I, M Digital: DVB-T/DVB-C Satellite: DVB-S/DVB-S2 Colour/video system Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input) Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4 Channel coverage Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41 D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69/M: A2-A13, A14-A79 Digital: VHF/UHF Satellite: IF Frequency 950-2150 MHz Sound output 10 W + 10 W (KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-46/40/32CX52x, KDL-32EX42x) 8 W + 8 W (KDL-26/24/22EX32x) Input/Output jacks Antenna (aerial) cable 75 ohm external terminal for VHF/UHF Satellite antenna (aerial) Female F-Type Connector IEC169-24, 75 ohm. DiSEqC 1.0, LNB 13V/18V & 22 KHz tone / AV1 21-pin scart connector (CENELEC standard) including audio/video input, RGB ...

Download now

Please, enter two numbers from picture: