Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 1   File size: 4 mb   Manafacture: Earlex  
Category: Paint Sprayers
@name

Fit the strap hooks into the round holes at the top of the Spray Pack. ii. Feed the strap through the vertical slots at the bottom of the Spray Pack, loop around and feed back through the strap buckle. Spraying IT IS RECOMMENDED THAT THE UNIT IS TESTED WITH WATER PRIOR TO EACH USE 1. Remove Spray Pack Lid (2) and pour in required spray material and thinners. 2. Ensure the spray material and thinners do not exceed the max fill line on the Spray Pack. 3. Fit the Spray Pack Lid, ensuring that Seal

downloaded: 12   File size: 450 kb   Manafacture: Earlex  
Category: Paint Sprayers
@name

Refer to the chapter on cleaning to see how the Fluid Tip and Fluid Needle can be removed and switched for a smaller/larger Fluid Tip and Fluid Needle assembly. • Fill the Paint Container with the product to be sprayed. Stir well (as mentioned above). • Screw the Paint Container to the base of the Spray Gun and tighten accordingly. • Unroll the motor unit air hose and attach it to the back of the Spray Gun. • Unroll the power cable and attach the plug to the mains supply. • Switch the Spray Stat

downloaded: 15   File size: 891 kb   Manafacture: Earlex  
Category: Paint Sprayers
@name

• Always have a drop cloth and wear a mask like you would for a roller or brush if spraying inside. • Practice your technique (even if you have sprayed before), just to familiarize yourself with the coating and different spray patterns and flow rate of the gun. • Spend a few minutes getting the viscosity of the paint where it needs to be. • Always clean up your Spray Gun after every use. PLEASE READ MAIN INSTRUCTION MANUAL BEFORE USE Basic Rules of Spraying Follow these simple instructions to se

downloaded: 4   File size: 190 kb   Manafacture: Earlex  
Category: Paint Sprayers
@name

Please retain for future reference SAFETY OPERATING INSTRUCTIONS PLEASE READ BEFORE USE . ALWAYS CHECK PAINT MANUFACTURERS THINNING INSTRUCTIONS BEFORE PROCEEDING. . ALWAYS CHECK PAINT MANUFACTURER’S INSTRUCTIONS FOR SURFACE PREPARATION. . ENSURE PAINT IS STIRRED THOROUGHLY BEFORE USE. . Never use corroded or damaged batteries, do not mix old and new batteries. . Do not overfill the paint reservoir. . NEVER use any liquids other than those specified. . Always ensure motor housing is firmly clipp

downloaded: 2   File size: 490 kb   Manafacture: Earlex  
Category: Paint Sprayers
@name

Earlex Ltd will accept no responsibility for the use of this product if usedfor any other purposes than those detailed herein. SAFETY OPERATING INSTRUCTIONS WARNING: When using the Paint Sprayer, basic safety precautions, including the following, should always be followed t< reduce the risk of fire, electric shock and personal injury ! Keep work area clean -Cluttered areas and benches invite injuries. ! Consider work area environment -Do not expose the spray gun to rain. Do not use the spray gun

downloaded: 2   File size: 2 mb   Manafacture: Earlex  
Category: Paint Sprayers
@name@name@name

2. Pour any residual material into its container so that it can be used for the future. 3. Pour a quantity of the respective thinner into Container, shake the gun lightly, reassemble the gun, then spray this liquid through the gun. Repeat this until the thinner being sprayed is coming through with no traces of paint. 4. Clean any traces of paint off the outside of the gun. 5. Clean the Paint Container Seal (12) inside the gun body. 7 L0553 (04-08) (US-FR-ES).qxd 20/6/08 2:25 pm Page 8 L0553 (04-

downloaded: 0   File size: 582 kb   Manafacture: Earlex  
Category: Paint Sprayers
@name

The round spray is used for small objects or for areas - such as corners – that are difficult to reach. To adjust the spray pattern, loosen the Air Cap Ring (1), adjust the position of the Air Cap (2) to obtain either a vertical, horizontal or round pattern then re-tighten the aircap ring. PAINT VOLUME The volume of paint sprayed is easily adjustable. (Fig.5(a)) Completely close Fluid Adjusting Screw (8) by turning this clockwise as far as it will go. Whilst pulling the trigger, begin turning th

downloaded: 0   File size: 582 kb   Manafacture: Earlex  
Category: Paint Sprayers
@name

BEFORE USE - PLEASE READ THE SAFETY & OPERATING INSTRUCTIONS. Please retain for future reference N0150 05/05.qxd 27/5/05 10:28 am Page 2 SAFETY INSTRUCTIONS WARNING! FIRE AND EXPLOSION HAZARD. . CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY, USE INDOORS ONLY. . The substances used with this spray applicator (paint, thinners etc) may contain hazardous, harmful, explosive or corrosive materials. ALWAYS COMPLY WITH THE SAFETY INSTRUCTIONS ISSUED WITH THIS PRODUCT AND THE MATERIAL BEING US

downloaded: 0   File size: 1 mb   Manafacture: Earlex  
Category: Paint Sprayers
@name

The spray applicator should be thoroughly cleaned after each use. Follow the cleaning instructions on page 9 with reference to the drawings on page 3 ! Check the needle and fluid tip on a regular basis for excessive wear, and replace as necessary. See the cleaning instructions for the correct procedure for removing these parts. Replacement needle sets are available from Earlex Ltd. ! Keep all moving parts lubricated with a light smear of petroleum jelly. ! Lubricate the gland washer, after each

downloaded: 9   File size: 788 kb   Manafacture: Earlex  
Category: Paint Sprayers
@name@name@name

Please retain for future reference. MODE D’EMPLOI AVANT UTILISATION, MERCI DE LIRE ATTENTIVEMENT LE MODE D'EMPLOI ET LES CONSIGNES DE SECURITE. Veuillez conserver cette notice pour toute consultation future. MANUAL DE INSTRUCCIONES ANTES DE UTILIZARLA -POR FAVOR LEA EL MANUAL PRINCIPAL Y LAS INSTRUCCIONES DE SEGURIDAD. Guardelo para futuras consultas. DO NOT RETURN TO STORE IF THIS PRODUCT HAS BEEN USED If you have any questions relating to this product please contact Earlex customer service TOL





Category