Operating Instructions Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Detail Spray Gun Description A conventional siphon feed detail spray gun designed to spray all light to medium viscosity materials. It has

Manual de Instrucciones y Lista de Piezas Pistola Pulverizadora HVLP Alimentada por Gravedad 34 FAN DIRECTION The direction of the fan (horizontal or vertical) can be changed by loosening the lock ring and turning the air cap 90 degrees (See Figure 3). Hand tighten lock ring after adjustment. PATTERN ADJUSTMENT 1. Adjust air pressure to the spray gun according to the recommendations supplied with the spray material. This air pressure usually falls between 40 - 60 psi. Do not exceed spray gun max

Enamels, lacquers, polyurethane, urethane topcoats (including basecoat / clearcoat) and all primers can be applied. The spray gun has fluid, pattern and air controls and is supplied with a 1 quart anti-drip siphon cup. Description Le HDS750 est un pistolet vaporisateur à alimentation par siphon traditionnel conçu pour la pulvérisation de matériaux de viscosité légère - moyenne tels que l'émail, la laque, le polyuréthane, les enduits uréthanes (y compris couches de base/finition) et tous types

Ref. No. Description Part No. Qty * 3/8 NPS (M) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 9 Figure 10 1 Gun body assembly N/A 1 2 Snap retaining ring 2 3 Trigger pin 1 4 Fluid needle assy. 1 5 Air cap lock ring 1 6 Air cap (internal mix) 1 7 Air cap (external mix) 1 8 Fluid tip 1 9 11/32 x 7/32” O-ring 2 10 Spring 1 11 Material adjusting knob 1 12 Valve piston 1 13 3/8 x 1/4” O-ring 1 14 7/16 x 5/16” O-ring 1 15 Spring 1 16 11/16 x 7/8” O-Ring 1 17 Packi

Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Gravity Feed Spray Gun Description Air operated spray guns are designed to perform a variety of painting, coating, and finishing applications using the power of compressed air. Safety Guidelines This man

The paint will dry inside and quickly clog the air cap. EXTERNAL MIX – Process where the air and paint are mixed just after leaving the nozzle. This type of mix should be used for fast drying paints and when a high quality finish is needed. BLEEDER/NON-BLEEDER – Indicates whether air flows through the gun continuously or as the trigger is pulled. BLEEDER – In this mode, air passes continuously through the gun whether spraying or not. This mode is generally used when the air is supplied by a cont