Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 3   File size: 1 mb   Manafacture: Heat & Glo LifeStyle  
Category: Kitchen-ranges
@name

It will be necessary to cut wall studs and install a header and sill frame to maintain proper dimensions and to hold the weight of the brick (Figure 11). 10 INSTALLATION USING MASONRY OR BRICK CHIMNEY Minimum 3 %" (89mm) [4" (102mm) nominal] thick solid bricks are to be used. The fire clay liner (ASTM C35 or equivalent), 5/8" (16mm) wall thickness, must not penetrate into the chimney beyond the inner surface of the chimney flue liner and must be firmly cemented in place. If it is necessary to

downloaded: 8   File size: 1 mb   Manafacture: Heat & Glo LifeStyle  
Category: Kitchen-ranges
@name

Do not remove ground prong from plug. Route power cord to avoid heat from the stove, or other damage. 3. Adjust the blower speed control to the desired speed. BLOWER SWITCH ADJUSTMENTS The blower speed control for this unit is adjusted at the factory, and should not require further adjustment. When the speed control is turned clockwise, it will click on to high speed. Turn the speed control clockwise to decrease the speed. At full clockwise, the blower should blow gently, but should not stop.

downloaded: 13   File size: 1 mb   Manafacture: Heat & Glo LifeStyle  
Category: Kitchen-ranges
@name

Printed in U.S.A. Copyright 2000, Heat-N-Glo, a division of Hearth Technologies Inc. 20802 Kensington Blvd., Lakeville, MN 55044 Models: WS-150 WS-250 1. When installing your stove, particular attention should be paid to fire protection. If this unit is not properly installed, a house fire may result. For your safety, follow the installation instructions and contact local building or fire officials about restrictions and installation inspection requirements in your area. 2. Never use gasoline or

downloaded: 0   File size: 2 mb   Manafacture: Heat & Glo LifeStyle  
Category: Kitchen-ranges
@name

When requesting service or replacement parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from an authorized dealer. Stocked at Depot ITEM DESCRIPTION COMMENTS PART NUMBER 1 Pilot Assembly NG 2103-010 Y Pilot Assembly LP 2103-011 Y 2 Pilot Bracket 319-164 3 Shutter Bracket Assembly 2026-130 Y 4 Orifi ce NG (#35C) 582-835 Y Orifi ce LP (#52C) 582-852 Y 5 Shutter Arm, Top 319-170 6 Shutter Arm, Bottom 319-168 7 L Bracket 319-120 8

downloaded: 0   File size: 2 mb   Manafacture: Heat & Glo LifeStyle  
Category: Kitchen-ranges
@name

F • 9/08 1 Model: MTL-Insert • Do not store or use gasoline or other fl ammable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - Do not try to light any appliance - Do not touch any electrical switch. Do not use any phone in your building. - Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. - If you cannot reach your gas supplier, call the fi re department. • Installation and service must be perfo





Category