unsuitable *care should be taken when using any pans on these surfaces not to drag and cause scratching. General Information Notes (Ceramic Hobs) Do Not Do not cook directly on the hob surface without a cooking utensil, as this will result in damage to the surface of the hob. Do not use the hob as a worktop surface as damage may occur to the smooth surface of the hob. Do not drag or slide utensils on the hob surface, as this will cause scratches in the surface of the hob. Do not allow a cooking

Verify that local building codes will permit installing the gas valve behind the range. A manual shut off valve must be installed in the gas piping, external to the appliance, for the purpose of turning on or shutting off gas to the appliance. Plan the location of the range and the gas supply to allow access to the valve when the unit is installed and in operation. Access to the remote circuit breaker panel/fuse box, with the range in place and operating, must also be allowed for in the installa

Meats will sear beautifully and stay succulently moist. Cookies and baked goods will rise and brown nicely, even if more than one rack is used at a time. Included in this guide are useful tips, easy-to-read charts, and over 30 of my favorite recipes. Also included are a couple of multiple rack meals, which will show you how to stage a meal in the oven and have your main dish, side dish, bread and dessert cook to perfection. This guide will help you maximize the use of your new Dacor range. It wi

7. When the time expires and/or the food is done cooking, press the “CANCEL•SECURE” pad to turn off the oven. Securing Controls To avoid accidentally turning the oven on, activate the “SECURE” feature. Press and hold the “CANCEL•SECURE” pad for approximately three seconds. This will disable the control panel and allow cleaning the controls without accidentally starting any functions. Three beeps will sound and “OFF” will appear in the display when the control panel has been secured. To re-activa

C. Connecting the Green Appliance wire to a Grounded Supply wire or a Grounded Cold water Pipe – where Local Codes Permit. (All Models) 1. Separate the green and white appliance wires. 2. Connect the white appliance wire to the neutral (white) supply wire in the junction box. 3. Connect the black appliance wire to the black (L1) power supply wire in the junction box. Cable from 4. Connect the red appliance wire to the red (L2) power supply wire in the junction box. 5. Connect the green appliance

CONVENTIONS USEd IN ThESE INSTRUCTIONS IMPORTANT NOTES: Contain helpful hints and tips to facilitate the installation. wARNINGS: Must be followed carefully to avoid personal injury or damage. 1. Before beginning installation, please thoroughly read and become familiar with these instructions. 2. Installation and service must be completed by a qualified installer or service agency. 3. Installer: Please leave these Installation Instructions with the owner. 4. Owner: Please keep these instructions

backsplash A I ;T 1/4" (6mm) Min. flat ledge CUTOUT DIMENSIONS (Slide-In, Self-Rimming Installation with Side Panels and Backguard Removed) NOTE: 1. when backguard is removed, the side panels must be removed. Web: Corporate Phone: 800-793-0093 Specifications are subject to change without notice. See installation instructions for additional details. 5.8

(Recommended) 2. Contact your local building department to verify compliance with local code interpretation. 3. Two electrical circuits and gas supplies required. Web: Corporate Phone: 800-793-0093 Specifications are subject to change without notice. See installation instructions for additional details. 5.7 ERD60 dacan The Life of the Kitchen.® Revised 06/25/08 60" Wide, Epicure® Range 2/2 PLANNING GUIDE COUNTERTOP CUTOUT DIMENSIONS (Slide-In, Freestanding Installation) 25’ (635

AESP03) ERD/EGR30, ERD60 OVERALL DIMENSIONS SIDE VIEW REAR vIEW 0 0 Dacor® Model No. Dedicated Circuit* Required Total Connected Load gas Type Manifold Pressure Min. Gas Supply Pressure ERD60 240 Vac, 4-wire, 60 Hz, 30 Amp (Breaker) X2 4.1 kW (21Amp) X2 Natural 5” Water Column 6” Water Column ERD60LP Liquid Propane 10” Water Column 11” Water Column *Two separate dedicated circuits are required, one for left and one for the right side of the range. ELECTRICAL AND GAS SUPPLY REQUIREMENT

Warm water and liquid detergent are all that are needed for cleaning. Remove stubborn spots with a non-abrasive plastic mesh pad. To prevent scratching, do not use abrasives or abrasive cleaners. STEP 3: STEP 4: STEP 5: MAX GRIDDLE Grease trap toward back Line up bottom of grill with top of grate EG366 and EG486 Put over center burners Page 2 Grill Placement and Use ER36D and ER48D Put over center burners "^Tj CAUTION: For grills used with model ER30G, the kit comes with two extra