Votes - 2, Average rating: 4.5
(
)
)
|
Other manuals for this model:
manual abstract
For each hour of looking at the monitor, you should let your eyes rest for 5 minutes. This will reduce eye fatigue. Do not use or store inflammable substances near the monitor. This may cause an explosion or fire. Do not try to move the monitor by pulling on the wire or the signal cable. This may cause a breakdown, electric shock or a fire due to damage to the cable. User’s Manual 9 9 Do not move the monitor right or left by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or a fire due to damage to the cable. Never insert anything metallic into the monitor openings. This may cause an electric shock, fire or injury. Keep the monitor away from any magnetic substances.. This may cause discoloring or distortion of the image. User’s Manual 10 Introduction Unpacking Monitor and Stand Power Cord Stand Quick Setup Guide (Your monitor is shipped with the base detached.) Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Warranty card (Not available in all locations) User's Guide and Driver Installation CD User’s Manual 11 Introduction Front 1. Exit button : Use this button to Exit the active menu or the OSD. 2,3. Adjust buttons : These buttons allow you to highlight and adjust items in the menu. 4. Menu button : Use this button to open the OSD and activate a highlighted menu item. 5. Power indicator : Indicates normal or Power Saving Mode. 6. Power button : Use this button to turn the monitor on and off. Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conversation,turn your monitor OFF when it is not needed,or when leaving it unattended for long periods. User’s Manual 12 Introduction Rear (The configuration at the back of the moniter may vary from product to product.) 1. Power port : Connect the power cord for your monitor to the power port on the back of the monitor. 2.Signal cable :Connect the end of the signal cable to your computer's video port (video board,video card or graphics card). Note: See Connecting Your Monitor for further information regarding cable connections. Bottom 1. Signal cable : Connect the end of the signal cable to your computer's video port(video board, video card or graphics card). 2. Power port : Connect the power cord for your monitor to the power port on the back of the monitor. 3. Tilt/Swivel Base : You can separate the base from the monitor. User’s Manual 13 Setup Connecting Your Monitor 1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2.Connect the end of the signal cable to your computer's video port(video board, video card or graphics card). 3.If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter(Adapter not included). A PC-compatible computer does not need an adapter. 4.Turn on your computer and monitor. If your monitor displays an image, installation is complete. User’s Manual 14 14 Setup Installing the Video Driver When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating sys tem to another. Follow the directions as appropriate for the operating system you have. Windows ME 1. Insert CD into the CD-ROM driver. 2. Click "Windows ME Driver". 3. Choose your monitor model in the model list, then click the "OK" button. User’s Manual 15 Setup Installing the Video Driver 4. Click the "Install" button in the "Warning" window. 5. Monitor Driver installation is completed. Windows XP/2000 1. Insert CD into the CD-ROM driver. 2. Click "Windows XP/2000 Driver". 3. Choose your monitor model in the model list, then click the "OK" button. User’s Manual 16 16 Setup Installing the Video Driver 4. Click the "Install" button in the "Warning" window. 5. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo, and this installation don't damage your system. The certifidedriver will be posted on Samsung Monitor Homepage. 6. Monitor Driver installation is completed. User’s Manual 17 17 Setup Installing the Video Driver When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating sys tem to another. Follow the directions as appropriate for the operating system you have. 1. Insert CD into the CD-ROM driver. 2. Click "Start" —> "Control Panel" then click the "Appearance and Themes" Icon. Microsoft® Windows® XP Operating System 3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". User’s Manual 18 18 Setup Installing the Video Driver 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Drive...