A new spark plug 8. Purge pump of air and contaminants. and clean air filter assure proper fuel-air mixture and help your engine run better and last longer. if equipped with inflatable tires, keep the air pressure at the value marked on the tire or within 15 and 40 psi. 13 PRESSURE WASHER C_ean Debris Daily or before use, clean accumulated debris from pressure washer. Keep linkage, spring and controls clean. Keep area around and behind muffler free from any combustible debris. Pressure washer pa

Such certification does not grant the purchaser, owner or operator of this engine any additional warranties with respect to the performance or operational life of this engine. The engine is warranted solely according to the product and emissions warranties stated elsewhere in this manual. Power Ratings The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision

In some areas, it is illegal to operate an engine without a spark arrester. Check local laws and regulations, A spark arrester is available from your nearest Sears service center. If you need to order a spark arrester, please call 1-800-366-PART, The spark arrester must be serviced every 50 hours to keep it functioning as designed. If the engine has been running, the muffler will be very hot. Allow the muffler to cool before servicing spark arrester. M WARNING MPHPt ■H riuMimig engines pr

Use of SAE30 oil below 40°F (4°C) will result in hard starting and possible engine damage dL_e to inad equate _ubrication. Gasoline Your pressure washer engine is 4 cycle. Use unteaded fuel only. CAUTION: Do not overfill the fuel tank. Always allow room for fuel expansion. WARNING: Never fitl fuel tank indoors. Never fill fuet tank when engine is running or hot, Do not smoke or have open flame when filting fuel tank. Use clean, fresh, regutar unleaded gasoline with a minimum of 85 octane. Do not

-Fri. 8 a.m. to 5 p.m. (CT) ®AssembJy ®Operation ADV =RT = CIA ,, Maintenance Beforeusingthisproduct,readthis Antesdeutiiizareiproducto,ieaeste manuatandfoiiow aliSafetyRuIes manuaiysigatodaslasRegIasde ®Parts and Operating instructions= Seguridade instrucciones de Uso= ,, Espa_oi, p. 34 Sears, Roebuck and Co., Hoffman Estates, [L 68179 U.S.A. Visit our Craftsman website: Part No. 203771GS Draft -(04/18/2007) WARRANTY.......................................... SAFETYRULES.........................

-Fri. 8 a.m. to 5 p.m. (CT) WARm.G Beforeusingthis product, readthis manual and follow all Safety Rules and Operating Instructions. ® ADVERTENCJA Antes de utilizar el producto, lea este manualy siga todas las Reglasde Seguridade Instrucciones de Uso. • Safety ,, Assembly ,, Operation ,, Maintenance ,, Parts ,, Espafiol, p. 34 Sears, Roebuckand Co., RoffmanEstates,IL 60179 U.S.A. Visit our Craftsman website:Part No. 205732GS Draft A (01/10/2008) WARRANTY..........................................

Depress triqqer qun Won’t Draw Chemical Nozzle not in chemical draw position Chemical screen is obstructed Chemical screen not working Chemical injector orifice obstructed or stuck Push nozzle forward at end of wand. Check chemical screen, clean of obstructed. Make sure chemical screen is submerged in chemical/ water Check and clean Pump running normally but pressure does not achieve rated values. Water supply restricted Nozzle is in low PSI position Nozzle incorrect or worn Pump sucking air N

Hand tighten. 5. Remove tie wrap off of high pressure hose. Unwind high pressure hose and attach the threaded end to the gun. Tighten with adjustable wrench. 6. Connect high pressure hose to outlet on pressure washer and hand tighten firmly. HIGH PRESSURE HOSE NOTE: Always keep hose away from engine muffler. D20590 6-ENG 7. Place assembled gun and wand on pressure washer holder. Cord Wire Bracket Gun/Wand Holder 8. Place pull cord into the wire bracket holder. • Pull the cord under the wire brac

Do not discard with household waste. Check with your local authorities for safe disposal/recycling facilities. • Using a 5/16" Allen wrench remove pump oil drain plug. • Tilt unit and drain pump oil into appropriate container. • Fill pump with 10 ounces of R&O 150 oil. NOTE: If unable to find R&O 150 oil, use 30W non- detergent oil. • Replace oil drain plug and tighten securely. • Refill engine with oil and fuel. See Engine Oil on page 8. Purge Pump of Air and Contaminants To remove the air from

Also included may be hoses, belts, connectors and other emission related assemblies. Where a warrantable condition exists, Sears will repair your small off-road engine at no cost to you including diagnosis, parts and labor. Sears Emission Control Defects Warranty Coverage The 1995 and later small off-road engines are warrar_ed for two years. If any emission-related part on your engine is defective, the part will be repaired or replaced by Sears. Owner's Warranty Responsibilities As the small off