Keep in mind that the washer’s detergent system further dilutes the detergent with water, and that some detergents may not be concentrated enough to properly work with the system. Some detergents may not give premix instructions and may require experimenting to determine proper dilution for your application. If you are not familiar with the detergent, always test a small area of the surface to be cleaned for adverse reaction. Do this a day in advance. Thoroughly rinse area with water. Operating

Check proper level. . Place unit on level surface. 2. Remove oil filler cap/dipstick (A) and wipe it clean. 3. Insert filler cap/dipstick into oil filler neck, but DO NOT screw it in. 4. Remove dipstick. Proper oil level is at midpoint of dipstick (A). Add oil if necessary to bring oil level to top of threads (B). 5. Install and tighten cap. a P04-0 07 b sae 5W-30 P05-0 07 gasOline engine Oil Use oil viscosity based on the expected air temperature 50°C 122°f range during the period between oil c

. . . . . . . . 20 John Deere® and the leaping deer logo are registered trademarks of Deere & Co. and are used under license to Briggs & Stratton Power Products. All information, illustrations and specifications in this manual are based on the latest information at the time of publication. The right is reserved to make changes at any time without notice and without incurring obligation. Copyright © 2007 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this material ma

Developed to ensure Optimum Performance andProtection. IMPORTANT...Use Year Round! 341904 012011 Warning: This product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash your hands after handling this product. INTRODUCTION Congratulations on the purchase of your new John Deere hot water pressure washer featuring the patented Electro Magnetic Firing (EMF) System! You can be assured your John Deere hot water pressure washer was constr

3. Adjust the engine to a low speed until you see water exiting the water outlet. NOTE: This may take up to 3-5 minutes. Adjust the engine throttle back to full RPM. 4. Once the unit is primed, stop the engine and connect the high pressure discharge hose to the water outlet of the unit. NOTE: The trigger gun and dual lance assembly should already be connected to the high pressure discharge hose at this time. START-UP/COLD WATER OPERATION: 1. Refer to the "Safety Precautions" pgs. 4-7 before star

3. On initial start-up, add oil to the engine, (20 oz.). See Engine manual for proper oil level. The oil level must be checked each time thereafter before starting the engine. 4. A minimum of 77 octane fuel is recommended for use with this unit. DO NOT MIX OIL WITH GASOLINE. 5. Purchase fuel in quantities that may be used within 30 days. Use of clean, fresh lead free gasoline is recommended. Leaded gasoline may be used if lead-free is unavailable. DO NOT use gasoline containing methanol or alcoh

Save this manual for future reference. North American Edition Litho in USA INTRODUCTION Read this manual carefully and become familiar with your pressure washer. Know its applications, its limitations and any hazards involved. Thank You for Purchasing a John Deere Product We appreciate having you as a customer and wish you many years of safe and satisfied use of your machine. Using Your Operator’s Manual This manual is an important part of your machine and should remain with the machine when you

Field cleaning of the sprayer from one job to the next is a good business practice and insures happy customers. Cleaning a sprayer in town requires containment of the spray materials to prevent contamination of local water supplies. The John Deere SprayMaster Power Washer, complete On-Board Hydraulic Powered High Pressure Wash System is designed to make short work of the cleaning process. With 4 gpm @ 1500 psi, 50 feet of high pressure hose, and a trigger gun with a 36'' lance, you can quickly c