Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 16   File size: 840 kb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name

Specifications The refrigerating circuit is leak-proof. The machine is adaptive in followingsituation 1.Applicable ambient temperature range: Cooling Indoor Maximum:D.B/W.B 32oC/23oC 18oC/14oCMinimum:D.B/W.B Outdoor 43oC/26oC 18oC Maximum:D.B/W.B Maximum:D.B HeatingIndoor 27oC 15oC Maximum:D.B Maximum:D.B Outdoor 24oC/18oCMaximum:D.B/W.B Minimum:D.B/W.B -7oC/-8oC 2. If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person. 3.

downloaded: 16   File size: 4 mb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name

proper leveling for the plate first fixed “, for the 2 Making a Hole on the Wall and Fitting the Piping Hole Cover Drawing of pipe 3 Installation of the Indoor Unit [ Rear piping ] .Draw pipes and the drain hose, then fasten them with the adhesive tape [ Left..Left-rear piping ] . In case of left side piping, cut away, with a nipper, the lid for left piping. . In case of left-rear piping, bend the pipes according to the piping direction to the mark of hole for left-rear piping which is marked on

downloaded: 21   File size: 655 kb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name@name@name@name

2. Make sure once more the proper level of the plate, by hanging a thread with a weight from the central top of the plate, then fasten securely the plate with the attachment steel nail. 3. Find the wall hole location A using a measuring tape A=145mmB= mm0360mm When the mounting plate is fixed side bar and lintel Fix to side bar and lintel a mounting bar, Which is separately sold, and then fasten the plate to the fixed mounting bar. Refer to the previous article, " When the mounting plate is firs

downloaded: 5   File size: 188 kb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name

The distance between the indoor unit and the floor should be more than 2m. Adhesive tape Saddle(L.S) with screws Connecting electric cable for indoor and outdoor Drain hose Heating insulating material 4X25 Piping hole cover Read this manual before installation 1.Driver 2.Hacksaw 3.Hole core drill 4.Spanner(17,19 and 26mm) 5.Torque wrench(17mm,22mm,26mm) 6.Pipe cutter 7.Flaring tool 8.Knife 9.Nipper 12.Reamer 10.Gas leakage detector or soap-and-water solution 11.Measuring tape Explain sufficientl

downloaded: 12   File size: 2 mb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name

PROHIBITION PROHIBITION PROHIBITION PROHIBITION PROHIBITION Do not install the unit near a fireplaceor other heating apparatus. Check good condition of the installation stand Do not pour water onto the unitfor cleaning PROHIBITION Do not place animals or plants inthe direct path of the air flow Do not place any objects on orclimb on the unit. Do not place flower vase or watercontainers on the top of the unit. PROHIBITION CAUTION 4 Parts and Functions Indoor unit Outlet Inlet Inlet grille Anion g

downloaded: 46   File size: 2 mb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name

FAN SPEED FAN SPEED Front panel Air inlet (indoor side) Air outlet (indoor side) Air inlet (outdoor side) Display panel Air filter (inside) Machine body Power plug Used to activate ENERGY SAVER option,reduce energy consumption and noise. 2 .. 1 2 3 4 5 6 7 MODE FAN SPEED E-S SWING POWER FAN,COOL,DEHUM. FAN SPEED ENERGY SAVER E-S TIMER button Used for TIMER start or stop . TEMP. or TIME set Used to set TIME or TEMP . setting . 3 If you choose the FAN SPEED mode you can run the Press MODE button.

downloaded: 15   File size: 1 mb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name@name@name@name

Unloading of indoor unit body When you unload the indoor unit,please use your hand to arise the body to leave agraffe,then lift the bottom of the body outward slightly and lift the unit aslant until it leaves the mounting plate. agraffe mounting plate 3 Indoor unit Indoor unit Connecting the indoor/outdoor Electric Cable Removing the wiring cover Remove terminal cover at right bottom corner of indoor unit, then take off wiring cover by removing its screws. When connecting the cable before instal

downloaded: 10   File size: 1 mb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name

2. Make sure once more the proper level of the plate, by hanging a thread with a weight from the central top of the plate, then fasten securely the plate with the attachment steel nail. 3. Find the wall hole location A using a measuring tape A=145mm B= 60mm 30mm When the mounting plate is fixed side bar and lintel Fix to side bar and lintel a mounting bar, Which is separately sold, and then fasten the plate to the fixed mounting bar. Refer to the previous article, " position of wall hole. 2.Maki

downloaded: 21   File size: 4 mb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name@name@name

...............................................................................15 In Canada ...................................................................................15 WARRANTY ..................................................................................16 INDICE SEGURIDAD DEL ACONDICIONADOR DE AIRE......................17 REQUISITOS DE INSTALACION.................................................17 Herramientas y piezas..............................................................

downloaded: 24   File size: 3 mb   Manafacture: Haier  
Category: Air Conditioner & Split Systems
@name

Every time the button is pressed,display changes as follows: ^ ^ BLANK- POWER SOFT Stop the display at" — In POWER operation status: In COOL mode, fan speed automatically runs in HI mode for 15 min then returns to original status setting. To cancel POWER operation Press POWER/SOFT button twice ,POWER/SOFT disappears. al & ON/OFF TEMP MODE A SET O CTTD FAN o SWING o I TIMER CLOCK -¿0 HEALTH POWER/SOFT o>





Category