o It must be protected with a 10 A slow-action fuse. o Should an extension lead be needed, this lead must be at least 1,5 mm2 per terminal thick, no more than 25 m. long and earthed. o There is a cavity at the back of the appliance for the mains electricity supply connection wire. o Do not allow water to enter the appliance. o Do not block the air inlets or outlets on your appliance, especially when used for heating. Should the mains electricity supply wire be damaged in any way, it must only be

When set to "silent", the appliance works very silently at a power of between 2.350 W and 1.950 W. o The appliance lowers the temperature and dries the air in the room at the same time in order to create ideal air conditions. o If the appliance turns itself off automatically via thermostat, then it is necessary to wait until room temperature rises 2°C before it comes back on again. o Condensed water formed during air conditioning evaporates automatically and is expelled outdoors, together with h

The appliance will shed water if you fail to do so. You have now removed all the excess water from the system and can turn the appliance back on and use as normal. Instructions for Use Ways of releasing air outdoors o Connect the diffusion duct to the hot-air expulsion duct. o Open the window slightly and feed the diffusion duct through the gap. o Close the window as much as possible and secure it in place using the suction pad provided. Temporary installation Permanent installation The applianc