See “To Operate on Fan Only” section on Page 6. TO CHANGE TEMPERATURE SETTING: PRESS TO RAISE PRESS TO LOWER DO THIS: AUTO TEMP SETS DISPLAYS TEMPERATURE/TIME FAN SPEED ACTIVATES TIMER CHECK FILTER RESET BUTTON SETS MODE TURNS UNIT ON OR OFF AUTO TEMP FEATURE SLEEP MODE SETS FAN SPEED ADJUSTS TEMP & TIME 6 Air Conditioner Features (continued) TO ADJUST FAN SPEEDS: YOU WILL SEE : DO THIS: PRESS TO SELECT: FASTER SLOWER TO USE AUTO TEMP FEATURE: YOU WILL SEE: Note: Fan speed starts at High Speed a

In the event that the power supply cord is damaged, it cannot be repaired-it must be replaced with a cord from the Product Manufacturer. Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord. Grounding type wall receptacle Do not, under any circumstances, cut, remove, or bypass the grounding prong. Power supply cord with 3-prong grounding plug and current detection device Read all instructions before using this air condi

too warm - NO ice forming on Temperature is set too High. Set temperature to a Lower setting. cooling coil behind decorative front. Air directional louvers positioned improperly. Position louvers for better air distribution. Front of unit is blocked by drapes, blinds, furniture, etc. - restricts air distribution. Clear blockage in front of unit. Doors, windows, registers, etc. open - cold air escapes. Close doors, windows, registers, etc. Unit recently turned on in hot room. Allow additional tim

This air conditioner includes a power supply cord with a 3-prong grounding plug. To minimize possible electrical shock hazard: -cord must be plugged into a mating 3-prong grounding-type wall receptacle, -must be grounded in accordance with National Electrical Code (ANSI/NFPA 70 latest version) and -all local codes and ordinances. If a mating 3-prong grounding-type wall receptacle is not available, it is the responsibility of the consumer to have a properly grounded 3-prong wall receptacle instal

Clean the air filter as recommended in the section “Care and Cleaning”. Proper insulation and weather stripping in your home will help keep warm air out and cool air in. External house shading with trees, plants or awnings will help reduce the air conditioner’s work load. Operate heat producing appliances such as ranges, washers, dryers and dishwashers during the coolest part of the day. 2009 Electrolux Home Products, Inc. All rights reserved. Before You Call Before calling for service, review t

See "To Operate on Fan Only" section on Page 6. YOU WILL SEE: YOU WILL SEE: Note: Fan starts at High Speed and adjusts to a slower speeds the room temperature dictates. For example, if the room doesn't get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature. Press either the fan slow

4-9 Product Registration ............................................. 3 Care and Cleaning .............................................. 10 Packaging ........................................................... 3 Energy Saving Ideas ........................................... 10 Normal Sounds .................................................... 3 Before You Call ................................................... 11 Air Conditioner Features ....................................... 4 Major Applian

Two or more people are needed to move and install the unit. To prevent injury or strain, use proper lifting and carrying techniques when moving unit. * Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over an extended period of time. * Handle air conditioner with care. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils. * Make sure air conditioner does not fall durin

The "Sleep" mode program can be cancelled at any time during operation by again pressing the "Sleep" button. COOLING MODE: In this mode the exhaust adaptor hose MUST be used. 1. Press the MODE button until the "Cool" indicator lights. 2. Press the " " Temp buttons for desired setting. 3. Press the FAN button for desired fan speed. HEATING MODE: In this mode you do not need to use the exhaust adaptor hose. (on some models) 1. Press the MODE button until the "Heat" indicator lights. 2. Press the "

Vibration Sound of Rushing Air At the front of the unit, you may hear the sound of rushing air being moved by the fan. Gurgle/Hiss “Gurgling or hissing” noise may be heard due to refrigerant passing through evaporator during normal operation. Product Registration 4 Product Registration & Normal Sounds 2009 Electrolux Home Products, Inc. All rights reserved. 5 Unit Description Unit Description & Accessories Included 2009 Electrolux Home Products, Inc. All rights reserved. Accessories Included CON