Login:
Votes - 0, Average rating: 0 ( )

User manual HP, model HP NetServer LC 3

Manafacture: HP
File size: 81.38 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract



HP NetServer LT 6000r Bezel Adapter Installation Sheet
The HP NetServer LT 6000r comes with bezel adapters included but not installed on the bezel. These adapters ensure
a proper fit between the bezel and the HP NetServer rack. Do not install the bezel adapters when installing the
LT 6000r in a Compaq rack.
Installing the Bezel and Bezel Adapters
1. Remove the bezel from the HP NetServer LT 6000r as follows:
a. Carefully disconnect the control panel cable from the front of the server.
b. Unclip the control panel cable from the clip on the back of the bezel.
c. Lift the bezel off the hinges to remove it.
Control Panel Cable Clip
Control Panel Cable
Figure 1. Remove the Bezel
2.
To install the left bezel adapter:
a. Line up the tabs on the bezel adapter with the holes on the inside of the bezel.
b. Push the tabs on the bezel adapter into the holes on the bezel.
' &! (& #'
HP Part Number D9143-90016
Printed in December 1999

...

Other models in this manual:
Desktops - HP NetServer LC 2000 (81.38 kb)
Desktops - HP NetServer LC 2000r (81.38 kb)
Desktops - HP NetServer LC II (81.38 kb)
Desktops - HP NetServer LC Plus (81.38 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category