Login:
Votes - 0, Average rating: 0 ( )

User manual HP, model HP NetServer LC 3

Manafacture: HP
File size: 66.09 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


SPU
Model
HP NetServer LX Pro Model 1 or HP NetServer LXe Pro Model 1
Clock speed
166 or 200 MHz.
No. of CPUs
2 – 4 (at least 2 are required)
BIOS version
1.00.08.CDOL or later
CPU cache
Any size
RAM
128 MB minimum. Must be HP.
No. of power supplies
3
Hot swap cages
May use for local storage; but not use for shared storage.
Local storage
Internal or external, using any controller. Must use HP disks. See
Local Storage below.
I/O slots:
See Shared Storage.
P1 - Intra-cluster LAN
P2 - Client LAN
All others - Any other plug-in cards.
LANs
Intra-cluster LAN
Client LAN
LAN connection
HP D5954A crossover cable or any
Any LAN
equivalent only
The intra-cluster LAN may only be
used for cluster node
communication via a crossover
cable. It may not be used for client
communication.
NIC:
Model
HP D5013A (10/100TX PCI)
Any that is on both the HP Tested
(or HP J3171A)
Products List and the Microsoft
Hardware Compatibility List.
Driver
2.24.00.0000 or later
Any driver
If the NIC used is the same as the
Intra-cluster LAN, then the Client
LAN must use the same driver as
the Intra-cluster LAN.
No. of NICs
1
1 minimum
SPU I\O slot
P1
P2
Local Storage
Physical drive location
SPU internal drive bays, or HP external drive cabinet (e.g., HP Storage
System/6), or any combination.
Disk drives
Must be HP
Controller
SPU embedded controller or any controller (any number, manufacturer
or driver) in any available I/O slot (see SPU I/O slots above).
SCSI bus
Any HP cables that meet SCSI specifications and any SCSI bus speed.
2


...

Other models in this manual:
Desktops - HP NetServer LC 2000 (66.09 kb)
Desktops - HP NetServer LC 2000r (66.09 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category