warrants this product to be free from defects in materials and workmanship for a period of one year from the date of purchase or MTI will repair, or at its option, replace the defective product. To obtain warranty service, call MTI for a return material authorization (RMA) number and return the product prepaid to Multiplex Technology, Inc., 3001 Enterprise Street, Brea, CA 92821, Attention: Customer Service. Please put the RMA number on the outside of the carton. Any implied warranty arising fro

may void the user's authority to operate this equipment. The ChannelPlus SVS-52 is a five input audio/video selector. The SVS-52 has inputs for S-video, composite video, analog audio and digital audio. The selected video output is available on two separate but equal outputs. The SVS-52 also has video convertion for viewing S-video on composite or viewing composite video on Svideo. Aremote control is included for easy input selection. FRONT PANEL CONTROLS: 2 VIDEO SELECTION S-VIDEO/COMPOSITE SELE

R Power Supply (included) Power Supply Adaptor (included) TV outputs (8) Power LED Modulator inputs (2) Antenna/CATV Model 3308 Top View Accessories 2 The 3308 Coaxial Cable Panel is the heart of a multiroom video distribution system. The 3308 connects as many as 8 televisions to cable or antenna, while maintaining compatibility with ChannelPlus video modulators and the ChannelPlus bi-directional IR repeating system. Model 2010 Power Injector wall plate (fits standard Decora) Model 2184 IR Break

Any change or modification to this device without the permission of Linear LLC may void the user's authority to operate this equipment. Linear® (760) 438-7000 USA & Canada (800) 996-5225 Toll Free FAX (800) 468-1340 OVERVIEW The SVC-10 is a complete audio/video/IR over CAT-5 tranmission system. Each SVC-10 includes a rack-mountable transmitter and a small receiver unit. The SVC-10 can transmit either composite video or S-video and either Pro-logic encoded analog stereo or Digital audio. The

To obtain warranty service, call MTI for a Return Material Authorization (RMA) number and return the product pre-paid accompanied by a copy of the purchase receipt, Attn: Customer Service. Please put the RMA number on the outside of the carton. Any implied warranty arising from the sale of the product including implied warranties of merchantability and fitness for purpose are limited to the warranty stated above. MTI shall not be responsible for any loss, damages or expenses, whether direct, con

Second, install the camera at the desired location and run Cat 5 wire from the camera to the channel location. Third, apply power and select an unused channel for the CatCam picture to appear on all the televisions. WARRANTY Multiplex Technology, Inc. warrants this defects in materials and the date of purchase or or at its option, replace defective product. To obtain warranty service, material authorization (RMA) to Multiplex Technology, Inc., 3001 Enterprise Street, Brea, 92821, Attention: Cust

default for the 9500 series. However, if the cable services uses HRC or the TV appears to search for the “created channel”, channel injector for HRC. For HRC enter 98. Reset to IRC by entering 99. Entries 98 and 99 are for setting HRC or IRC only. They will not change the channel number. With programming complete, test each TV in the system to see that it is receiving the new channel. How to Determine which source on and one unused channel avoid interference. channels and appear © 1999 Upper rig

Before Out to TVs Incoming CATV or antenna coax Now attach the supplied coax jumper back to the existing splitter and tighten all connections with a 7/16” wrench. After Mount the injector within 4” of the splitter Supplied coax jumper goes back to splitter Out Incoming CATV or to TVs antenna coax © 1999 Installation The camera wire from the shown. prepare the Cat 5 wires stripping 1” of outer sheath and 1/8” of insulation insert the 6-32 screws into frame and bottom holes of gang box gasketframe

Channel At the channel connect Cat color coding on blue/white pin 1 © 1999 When using only quad wire use positions 1, 2, 5 and 6 and follow color coding. green pin 1 run the Cat 5 wire through the grommet at the bottom of the injector Applying Power and Programming Step Three The 9500 series has three different methods for applying to the system. Use only one method for applying power. Method One: Apply power directly to the channel injector with the power supply. power supply Power plug © 1999

The channel injector designed to mount indoors or outdoors close or antenna feed. The system uses the existing in the house. The CatCam was designed to work with Cat 5 wiring. system will function with quad wire, Cat 5 delivers the picture. The Cat 5 allows the use of an automatic line length and picture compensator. Quad wire does not take advantage of this enhancement. Model Differences: The model 9500HHR series is a high headroom design for CATV and off air antenna feeds only. (5-806MHz) The