Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 17   File size: 1 mb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name

At the maximum level High, there is a risk of reducing useful audio as well. There is a trade-off between noise cancelling and sound quality. In other words, increasing the Noise canceller attenuation value compromises sound quality. Adjust the threshold and the attenuation to an optimum level by listening and changing the levels. Live View Config Layout These are the tools for deciding the layout of the Live View page. The layout can be set in two ways: •Use Axis look - the layout is unchanged.

downloaded: 13   File size: 680 kb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name@name@name@name@name

Follow these instructions: 1. After making the connections for network and power, wait for the Status indicator to show a steady green. 2. Press the Control button once. The Status indicator flashes green while it connects to the AXIS Internet Dynamic DNS Service. 3. Wait for the Status indicator to go back to showing a steady green. 4. To complete the installation, now visit from an Internet connected computer. This must be done within 60 minutes of pressing the Control button. 5. Follow the on

downloaded: 1   File size: 2 mb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name

This makes it possible for network routers and switches to e.g. reserve a fixed amount of bandwidth for these types of traffic. The following types of traffic are marked: •live video •event/alarm traffic •management network traffic. For each type of network traffic supported by your Axis network video product, enter a DSCP (Differentiated Services Codepoint) value. This value is used to mark the traffic’s IP header. When the marked traffic reaches a network router or switch, the DSCP value in th

downloaded: 0   File size: 2 mb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name

Supports baud • Humidity: 8-80% RHG, non-condensing rates up to 1843200 bps Product Warranty • A one-year warranty is included Pinout: 1 AC Power 2 AC Power 3 GND 4 RS422 GND Connected to GND through 100 ohm resistor 5 RX/TX-A Use pin 5 and 6 for 2-wire RS-485 6 RX/TX-B Use pin 5 and 6 for 2-wire RS-485 7 TX8 TX+ Parallel port & General purpose I/O • An onboard I/O port, located on pin headers, can be used as either a standard parallel data port, or as a general purpose I/O control port USB 1.1

downloaded: 1   File size: 2 mb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name

Complete ‘ready-to-use’ product Supplied as a single printed circuit board as the AXIS 82+ Developer Board, or packaged within a durable aluminum casing in the AXIS 83+ Device Server, these otherwise identical products are equipped with external connectors for dual* 100 MBit Ethernet, USB, COM1, COM2, and RS-485 connection. They are also equipped with internal connectors that accommodate one parallel port and an additional serial port. Enclosed in a black aluminum casing, the AXIS 83+ Device Ser

downloaded: 11   File size: 680 kb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name@name@name@name@name

Set the IP address manually 1. Acquire an unused IP address on the same network segment your computer is connected to. 2. Click the button (Set IP address using serial number) and enter the serial number and IP address for the Axis Video Server. 3. Click the Set IP button and then restart the Axis Video Server. 4. Click View Home Page to access the Axis Video Server’s web pages. 5. See page 11 for instructions on how to set the password. Note: AXIS IP Utility can be used to change a dynamically

downloaded: 3   File size: 680 kb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name@name@name@name@name

4. An active speaker and a microphone can be connected to the AXIS 241QA/AXIS 243SA to provide two-way audio. Notes: • Use an RCA-to-BNC adapter if your camera has a standard phono-type (RCA) connector. • Y/C video can be connected directly to the AXIS 242S IV, via the S-Video connector. • To connect Y/C video to the AXIS 241S/AXIS 243SA, use a Y/C to BNC adapter cable (not supplied). See the AXIS Video Server User’s Manual for more information. • The Line In & Mic In connectors on the AXIS 242S

downloaded: 192   File size: 680 kb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name@name@name@name@name

For all other aspects of using the product, please see the product User’s Manual, available on the CD included in this package, or from Installation steps Follow these steps to install the Axis Video Server on your local network (LAN): 1. Check the package contents against the list below. 2. Connect the Axis Video Server. See page 6. 3. Set an IP address. See page 7 for information on the available methods. 4. Set the password. See page 11. Package contents Item Description Axis Video Server mod

downloaded: 1   File size: 680 kb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name@name@name@name@name

Disconnect power from the Axis Video Server. 2. Press and hold the Control button and reconnect power. 3. Keep the button pressed until the Status Indicator displays yellow (this may take up to 15 seconds), then release the button. 4. When the Status indicator displays green (which can take up to 1 minute) the Axis Video Server is reset to the factory default settings. 5. Re-install the Axis Video Server using one of the methods described in this document. More information For more information,

downloaded: 22   File size: 3 mb   Manafacture: Axis Communications  
Category: Home Theater Systems
@name

•Set manually - this option allows you to manually set the time and date. Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the Live View video streams. Use the predefined formats or use your own custom date and time formats. See File Naming & Date/Time Formats in the online helpfor information on how to create your own file formats. Network - Basic TCP/IP Settings The IP address of the video server can be set automatically via DHCP, or a fix





Category