Votes - 2, Average rating: 4 ( )

Manafacture: Channel Plus File size: 144.25 kb File name: Language of manual:

Channel At the channel connect Cat color coding on blue/white pin 1 © 1999 When using only quad wire use positions 1, 2, 5 and 6 and follow color coding. green pin 1 run the Cat 5 wire through the grommet at the bottom of the injector Applying Power and Programming Step Three The 9500 series has three different methods for applying to the system. Use only one method for applying power. Method One: Apply power directly to the channel injector with the power supply. power supply Power plug © 1999 Lower right of channel injector The green LED in the upper right corner of the injector will be lit showing power is active. (See power length requirements page 9) Method Use the power injector to apply power Power Length 5 or quad wire Method One the power injector. Connect the plug the power power supply power injector pin 1 blue/white cut Cat 5 wire power plug Up to 100’ for the 9521 Color Power Length Requirements Method Two The green LED in the upper right corner of the channel injector be lit showing power is active. the 9511 B&W. Up to 100’ for the 9521 Color Method Three: Apply power directly at the camera. Power Length Requirements -+ -+ Method Three cut the power supply cord and strip the wires end removed wire with the white stripe connects to the (+) terminal power supply 7 6 Up to 300’ of Cat 5 or quad wire maximum for the 9511 B&W. power plug power plug Up to 100’ of Cat 5 or quad wire maximum Up to 300’ of Cat 5 or quad wire maximum for power supply with Up to 100’ of Cat 5 or quad wire maximum ...

Download now

Please, enter two numbers from picture: